Servo Saver Post (2 pcs)

HONG NOR
Servo Saver Post (2 pcs)
9,90 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-2 Werktage

  • Artikel-Nr.: X3-16
Beschreibung Bewertungen 0
Beschreibung
mehr
Menü schließen
Produktinformationen "Servo Saver Post (2 pcs)"
"Servo Saver Post (2 pcs)"

Verantwortlicher nach GPSR / person responsible GPSR

Gruber-Racing

Thiergartner Weg 14

08527 Plauen

info@gruber-racing.de

www.gruber-racing.de

Hersteller / Manufacturer

Hong Nor Hobbies International Co., Ltd.

8F.,No.184, Sec. 4,Chengde Rd.,

Shihlin Dist., Taipei 11167, Taiwan

Tel:+886-2-2888-1221

Hong Nor Hobbies International Co., Ltd.

e-mail:hong_nor@hci-rc.com

ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet

wegen verschluckbarer Kleinteile, Erstickungsgefahr.
CAUTION: Not suitable for children under 36 months

due to small parts that can be swallowed, choking hazard.

 

ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet.

Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
CAUTION: Not suitable for children under 14 years of age.

Use under the direct supervision of adults.


Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements

  • H 315: Verursacht Hautreizungen (Causes skin irritation)

  • H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)

  • H 335: Kann die Atemwege reizen (May irritate the respiratory tract)

Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements

  • P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)

  • P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aerosol vermeiden.

    (Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)

  • P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)

  • P 280: Schutzhandschuhe / Schutzkleidung / Augenschutz / Gesichtsschutz tragen. (Wear protective gloves /

    protective clothing / eye protection / face protection.)

  • P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen.

    Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes:

    Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)

  • P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)

  • P 405: Unter Verschluss aufbewahren. (Store under lock and key.)

  • P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)

Sicherheitshinweise / EUH | Safety instructions / EUH

  • EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen.

    Darf nicht in die Hände von Kindern gelangen. 



Bewertungen 0
Bewertungen lesen, schreiben und diskutieren... mehr
Menü schließen
Kundenbewertungen für "Servo Saver Post (2 pcs)"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Kunden kauften auch Kunden haben sich ebenfalls angesehen
Kunden kauften auch
Front Lower Arms Left & Right Front Lower Arms Left & Right
9,90 € *
Art.: X3-45
5x16 Bearing (metal cap) (2 pcs) 5x16 Bearing (metal cap) (2 pcs)
6,90 € *
Art.: X3S-37A
125.5mm Center Shaft (rear) 125.5mm Center Shaft (rear)
9,90 € *
Art.: XT-09B
Battery Straps, Black (2 pcs) Battery Straps, Black (2 pcs)
5,80 € *
Art.: 445
P6 O-Ring (2 pcs) P6 O-Ring (2 pcs)
1,90 € *
Art.: J-03A
CNC Aluminium Pinion Gear Mount CNC Aluminium Pinion Gear Mount
14,50 € *
Art.: X3S-22
Cup Joint For Planet Gear (2 pcs) Cup Joint For Planet Gear (2 pcs)
16,90 € *
Art.: X3GT-40
Alum. Front Reinforcement Bar& ESC Fixed Plate Alum. Front Reinforcement Bar& ESC Fixed Plate
53,50 € *
Art.: X3.6-32
Servo Saver Spring-Hard Servo Saver Spring-Hard
3,90 € *
Art.: X3GT-11
Body Mount Set Front and Rear Body Mount Set Front and Rear
7,90 € *
Art.: X3-84
Rear Lower Arms L+R Rear Lower Arms L+R
9,90 € *
Art.: X3-53
Diff Gasket 31x20x0.3mm (3 pcs) Diff Gasket 31x20x0.3mm (3 pcs)
3,90 € *
Art.: X3-38
Alum. Servo Saver Tube Alum. Servo Saver Tube
7,90 € *
Art.: X3-17
Corsatec - ESC "CTX-8RS" - Race Pro 1/8 - 250A (Black Edition) Corsatec - ESC "CTX-8RS" - Race Pro 1/8 - 250A (Black Edition)
197,90 € * 227,90 € *
Art.: CT30001BK
T-Works - Steel - Rear 96,4mm - CVD Set (2 Stück) - for GT T-Works - Steel - Rear 96,4mm - CVD Set (2 Stück) - for GT
49,90 € *
Art.: C-X3-R
Shock Spring (Yellow) - Soft (S) - (0,66 kg/mm) - 35x16mm (2 pcs) Shock Spring (Yellow) - Soft (S) - (0,66 kg/mm) - 35x16mm (2 pcs)
8,90 € *
Art.: X3GT-84S-2
Shock Spring (White) - Hard (H) - (0,76 kg/mm) - 35x16mm (2 pcs) Shock Spring (White) - Hard (H) - (0,76 kg/mm) - 35x16mm (2 pcs)
8,90 € *
Art.: X3GT-85S-2
T-Works L-Typ Schraubenzieher Sechskant 3.0mm T-Works L-Typ Schraubenzieher Sechskant 3.0mm
11,90 € *
Art.: TT-059-H3.0
T-Works L-Typ Schraubenzieher Sechskant 2.5mm T-Works L-Typ Schraubenzieher Sechskant 2.5mm
11,90 € *
Art.: TT-059-H2.5
T-Works L-Typ Schraubenzieher Sechskant 2.0mm T-Works L-Typ Schraubenzieher Sechskant 2.0mm
11,90 € *
Art.: TT-059-H2.0
T-Works Schraubenzieher Sechskant 5.0 x 80mm T-Works Schraubenzieher Sechskant 5.0 x 80mm
12,90 € *
Art.: TT-058-H5.0
T-Works - Team Boxen Handschuhe (1 Paar) T-Works - Team Boxen Handschuhe (1 Paar)
7,90 € *
Art.: AP-009-A
MYLAPS RC4 Transponder MYLAPS RC4 Transponder
109,90 € *
Art.: 10R120
SANWA RX-493i (107A41376A) Empfänger (4-Kanal/FH5) Dual ID + Signal Indicator SANWA RX-493i (107A41376A) Empfänger (4-Kanal/FH5) Dual ID + Signal...
64,90 € *
Art.: RX-493i
O.S. Kolbenbolzen für .12 Motoren O.S. Kolbenbolzen für .12 Motoren
7,90 € *
Art.: OS-21656000
O.S. Frontlager für alle O.S. - .12 Motoren O.S. Frontlager für alle O.S. - .12 Motoren
12,50 € *
Art.: OS-21630500
T-Works Starter Box Gummirad (für Hudy) T-Works Starter Box Gummirad (für Hudy)
8,90 € *
Art.: TT-034-H
T-Works Motorlager Werkzeug Satz für .12 Motoren T-Works Motorlager Werkzeug Satz für .12 Motoren
104,90 € *
Art.: TT-112-12
ILT - Single Pipe - Efra 2701 - (1/10 Onroad) ILT - Single Pipe - Efra 2701 - (1/10 Onroad)
70,99 € *
Art.: ILS-2701P
1/8 Super Diablo -precut- Mugen 1,0mm (light) 1/8 Super Diablo -precut- Mugen 1,0mm (light)
31,90 € *
Art.: MTB0414-10CM
Hong Nor GT Stoßdämpfer Set Hong Nor GT Stoßdämpfer Set
71,90 € *
Art.: 418S
Clutch Spring For Adjustable Clutch System (Soft) Clutch Spring For Adjustable Clutch System (Soft)
5,90 € *
Art.: X3GT-61G
Performance Rammer 9g (Ultra light) für Hong Nor GT (für Optionale Carbon Anbauteile X3GT-78) Performance Rammer 9g (Ultra light) für Hong Nor GT (für Optionale...
16,50 € *
Art.: GR-R-OPT
Front/Rear Differential Set (46T version) Front/Rear Differential Set (46T version)
39,90 € *
Art.: X3-97
RC Silikonöl (1 Million CST) für Diff - 100ml RC Silikonöl (1 Million CST) für Diff - 100ml
Inhalt 0.1 Liter (89,50 € * / 1 Liter)
8,95 € *
Art.: GR-1M
Bearing, 4x8 Flange (2 pcs) for X3S-44 Set Bearing, 4x8 Flange (2 pcs) for X3S-44 Set
11,90 € *
Art.: JS-06B
ITD Brushless Motor 2650kV On-Road for Hong Nor ITD Brushless Motor 2650kV On-Road for Hong Nor
129,00 € *
Art.: IT40004-HongNorSpec
Adjustable anti-roll bar ball end set (for NEW roll bars) Adjustable anti-roll bar ball end set (for NEW roll bars)
6,50 € *
Art.: X3S-52
New FRONT Anti-roll Bar 2,0mm New FRONT Anti-roll Bar 2,0mm
4,50 € *
Art.: X3S-53-2.0
New FRONT Anti-roll Bar 2,3mm New FRONT Anti-roll Bar 2,3mm
4,50 € *
Art.: X3S-53-2.3
Kunden haben sich ebenfalls angesehen
13T Pinion Gear (only compatible with X3-01) 13T Pinion Gear (only compatible with X3-01)
11,90 € *
Art.: X3-02
Hong Nor X3 Buggy Sticker Sheet Hong Nor X3 Buggy Sticker Sheet
7,90 € *
Art.: X3.6-11B
Front/Rear Differential Set (46T version) Front/Rear Differential Set (46T version)
39,90 € *
Art.: X3-97
Rear Lower Arms L&R (Hard) Rear Lower Arms L&R (Hard)
13,90 € *
Art.: X3-53H
Front Lower Arms L&R (Hard) use with X3-45B Front Lower Arms L&R (Hard) use with X3-45B
13,90 € *
Art.: X3-45H
New FRONT Anti-roll Bar 2,3mm New FRONT Anti-roll Bar 2,3mm
4,50 € *
Art.: X3S-53-2.3
Carbon Rear Plates+Rear Hub Alu. Set (Buggy) Carbon Rear Plates+Rear Hub Alu. Set (Buggy)
59,90 € *
Art.: X3S-48
Clutch Bell 2-Speed Alum Nickel Coated GT (for Modul 0.8) Clutch Bell 2-Speed Alum Nickel Coated GT (for Modul 0.8)
26,90 € *
Art.: 429K
Complete Diff. Set (Front/Rear) Complete Diff. Set (Front/Rear)
41,50 € *
Art.: XT-36
Lightweight Aluminium Ball Set Hard-Coated (for X3) Lightweight Aluminium Ball Set Hard-Coated (for X3)
34,90 € *
Art.: 398-X3
Lightweight Alum 7mm Ball, Hard-Coated (4 pcs) Lightweight Alum 7mm Ball, Hard-Coated (4 pcs)
5,90 € *
Art.: 398D
Lightweight 7x12 mm Alum, Ball (4 pcs) Lightweight 7x12 mm Alum, Ball (4 pcs)
10,90 € *
Art.: 398G
Lightweight 7x8.5mm Alum, Ball (4 pcs) Lightweight 7x8.5mm Alum, Ball (4 pcs)
10,90 € *
Art.: 398F
Lightweight Alum, Stabilizer Ball End. Hard-Coated (4 pcs) Lightweight Alum, Stabilizer Ball End. Hard-Coated (4 pcs)
5,90 € *
Art.: 398E
Lightweight 7mm Alum Ball, Hard-Coated (4 pcs) Lightweight 7mm Alum Ball, Hard-Coated (4 pcs)
5,90 € *
Art.: 398C
Lightweight, 6mm Ball& Socket (2 pcs) Lightweight, 6mm Ball& Socket (2 pcs)
4,90 € *
Art.: 398B
Lightweight 6mm Alum. Ball (8 pcs) Lightweight 6mm Alum. Ball (8 pcs)
5,90 € *
Art.: 398A
Swaybar Inserts From 2.5-3mm (2 pcs) Swaybar Inserts From 2.5-3mm (2 pcs)
11,90 € *
Art.: X3S-42B
Carbon/Aluminium Servo Saver Set Carbon/Aluminium Servo Saver Set
59,90 € *
Art.: X3S-44
16mm Big Bore Shock Set 16mm Big Bore Shock Set
75,90 € *
Art.: 387
Carbon 4.5mm Rear Shock Tower Carbon 4.5mm Rear Shock Tower
42,90 € *
Art.: X3.6-02
Carbon 4.5mm Front Shock Tower Carbon 4.5mm Front Shock Tower
39,90 € *
Art.: X3.6-01
16mm Shock Pressure Top (4 pcs) 16mm Shock Pressure Top (4 pcs)
7,50 € *
Art.: 388
16mm Shock Piston Set / 1.4 & 1.3mm 16mm Shock Piston Set / 1.4 & 1.3mm
8,90 € *
Art.: 387P
Knuckle Arm Bushing (4 pcs) Knuckle Arm Bushing (4 pcs)
4,50 € *
Art.: X1-27
7075-T6 Alum. Diff Cross Pin (Hard-coated) (6 pcs) 7075-T6 Alum. Diff Cross Pin (Hard-coated) (6 pcs)
9,90 € *
Art.: 363
17T (1st) Clutch Gear Modul 1 17T (1st) Clutch Gear Modul 1
9,80 € *
Art.: 294M
Aluminium Gear Case With 5x16 bearing (1 pcs) Aluminium Gear Case With 5x16 bearing (1 pcs)
82,90 € *
Art.: X3S-37
CNC C Hub, 14 Degree L+R CNC C Hub, 14 Degree L+R
69,90 € *
Art.: X3S-32
46T PLASTIC SPUR GEAR 46T PLASTIC SPUR GEAR
12,50 € *
Art.: X3S-17D
CNC Aluminium Pinion Gear Mount CNC Aluminium Pinion Gear Mount
14,50 € *
Art.: X3S-22
CNC 7075 Suspension Bracket , FF CNC 7075 Suspension Bracket , FF
23,50 € *
Art.: X3S-06
Center CVD Drive Shaft(Rear)117mm Center CVD Drive Shaft(Rear)117mm
16,50 € *
Art.: X3.6-16A
Center CVD Drive Shaft(Rear)98mm Center CVD Drive Shaft(Rear)98mm
14,50 € *
Art.: X3.6-15A
Center CVD Drive Shaft Set(Rear)98mm Center CVD Drive Shaft Set(Rear)98mm
24,50 € *
Art.: X3.6-15
Front Bumper/Rear Mud Guard Front Bumper/Rear Mud Guard
7,90 € *
Art.: X3-52
Body Post/Center Brace Body Post/Center Brace
9,90 € *
Art.: X3-49
TIPP
X3S EVO E 1/8 Buggy 4WD Pro Kit Electric X3S EVO E 1/8 Buggy 4WD Pro Kit Electric
553,35 € * 664,90 € *
Art.: 64017
Shock Mount Screw (4 pcs) Shock Mount Screw (4 pcs)
15,90 € *
Art.: X3-30
Alum. Front Reinforcement Bar& ESC Fixed Plate Alum. Front Reinforcement Bar& ESC Fixed Plate
53,50 € *
Art.: X3.6-32
Zuletzt angesehen