Produkte von HONG NOR

HONG NOR
Filter schließen
 
von bis
1 von 3
Für die Filterung wurden keine Ergebnisse gefunden!
Front/Rear Differential Set (46T version)
Front/Rear Differential Set (46T version)
39,90 € *
Art.: X3-97
CNC 7075-3mm Light Weight Chassis
CNC 7075-3mm Light Weight Chassis
95,90 € *
Art.: X3GT-56
TIPP
X3 GTS 1/8 Nitro GT World Champion Toni Gruber Edition
X3 GTS 1/8 Nitro GT World Champion Toni Gruber Edition
World Champion Edition out of the box with ALL tuning parts used at the 1h Main Final of the World Championship 2023 Sydney. For celebrating Hong Nor and Toni Gruber’s victory in the 2023 1/8GT World Championship, we’ve been preparing...
889,49 € *
Art.: 64025
4mm Carbon Low Profile Rear Shock Stay
4mm Carbon Low Profile Rear Shock Stay
32,90 € *
Art.: X3GT-79
Carbon Front Bumper Set
Carbon Front Bumper Set
72,90 € *
Art.: X3GT-78
Carbon Front Lower Arm Holder
Carbon Front Lower Arm Holder
9,90 € *
Art.: X3GT-78C
7x30.5mm Alum. Post (2 pcs)
7x30.5mm Alum. Post (2 pcs)
3,90 € *
Art.: X3GT-78D
Carbon Front Lower Bumper
Carbon Front Lower Bumper
32,90 € *
Art.: X3GT-78B
Carbon Front Upper Bumper
Carbon Front Upper Bumper
32,90 € *
Art.: X3GT-78A
Alum. Front Arm Mount (-3°)
Alum. Front Arm Mount (-3°)
20,90 € *
Art.: X3GT-77
Fuel Tank Post (2 pcs)
Fuel Tank Post (2 pcs)
6,90 € *
Art.: X3GT-74A
150cc Low Profile Fuel Tank
150cc Low Profile Fuel Tank
16,50 € *
Art.: X3GT-74
Alum. Throttle Servo Mount (2 pcs)
Alum. Throttle Servo Mount (2 pcs)
15,90 € *
Art.: X3GT-72
Fixing Pin (2 pcs) for X3GT-71
Fixing Pin (2 pcs) for X3GT-71
5,90 € *
Art.: X3GT-71E
Silicon Joint Cover (4 pcs)
Silicon Joint Cover (4 pcs)
5,90 € *
Art.: 326
Bearing, 4x8 Flange (2 pcs) for X3S-44 Set
Bearing, 4x8 Flange (2 pcs) for X3S-44 Set
11,90 € *
Art.: JS-06B
New REAR Anti-roll Bar 2,5mm
New REAR Anti-roll Bar 2,5mm
NEW Anti-rollbars possible to use only together with X3S-52 Adjustable anti-roll bar ball end set Hong Nor is now launching a new height-adjustable anti-roll bar, which was used by 2023 GT champion Toni Gruber in the Sydney GT World...
4,50 € *
Art.: X3S-54-2.5
New FRONT Anti-roll Bar 2,3mm
New FRONT Anti-roll Bar 2,3mm
NEW Anti-rollbars possible to use only together with X3S-52 Adjustable anti-roll bar ball end set Hong Nor is now launching a new height-adjustable anti-roll bar, which was used by 2023 GT champion Toni Gruber in the Sydney GT World...
4,50 € *
Art.: X3S-53-2.3
Adjustable anti-roll bar ball end set (for NEW roll bars)
Adjustable anti-roll bar ball end set (for NEW roll bars)
You need this Set only when you want use the new anti-roll bars. Without this set, you can not use the new anti-roll bars.
6,50 € *
Art.: X3S-52
Rear Lower Arms L&R (Hard)
Rear Lower Arms L&R (Hard)
Hong Nor releases new Suspension Arms made of stronger material. Able to be adjusted to handle different grips of tracks or high temperatures. Suitable for X3 series' Buggy and GT
13,90 € *
Art.: X3-53H
Front Lower Arms L&R (Hard) use with X3-45B
Front Lower Arms L&R (Hard) use with X3-45B
Hong Nor releases new Suspension Arms made of stronger material. Able to be adjusted to handle different grips of tracks or high temperatures. Suitable for X3 series' Buggy and GT
13,90 € *
Art.: X3-45H
New FRONT Anti-roll Bar 2,0mm
New FRONT Anti-roll Bar 2,0mm
NEW Anti-rollbars possible to use only together with X3S-52 Adjustable anti-roll bar ball end set Hong Nor is now launching a new height-adjustable anti-roll bar, which was used by 2023 GT champion Toni Gruber in the Sydney GT World...
4,50 € *
Art.: X3S-53-2.0
New FRONT Anti-roll Bar 2,5mm
New FRONT Anti-roll Bar 2,5mm
NEW Anti-rollbars possible to use only together with X3S-52 Adjustable anti-roll bar ball end set Hong Nor is now launching a new height-adjustable anti-roll bar, which was used by 2023 GT champion Toni Gruber in the Sydney GT World...
4,50 € *
Art.: X3S-53-2.5
New FRONT Anti-roll Bar 2,8mm
New FRONT Anti-roll Bar 2,8mm
NEW Anti-rollbars possible to use only together with X3S-52 Adjustable anti-roll bar ball end set Hong Nor is now launching a new height-adjustable anti-roll bar, which was used by 2023 GT champion Toni Gruber in the Sydney GT World...
4,90 € *
Art.: X3S-53-2.8
New REAR Anti-roll Bar 2,3mm
New REAR Anti-roll Bar 2,3mm
NEW Anti-rollbars possible to use only together with X3S-52 Adjustable anti-roll bar ball end set Hong Nor is now launching a new height-adjustable anti-roll bar, which was used by 2023 GT champion Toni Gruber in the Sydney GT World...
4,50 € *
Art.: X3S-54-2.3
New REAR Anti-roll Bar 2,8mm
New REAR Anti-roll Bar 2,8mm
NEW Anti-rollbars possible to use only together with X3S-52 Adjustable anti-roll bar ball end set Hong Nor is now launching a new height-adjustable anti-roll bar, which was used by 2023 GT champion Toni Gruber in the Sydney GT World...
4,90 € *
Art.: X3S-54-2.8
New REAR Anti-roll Bar 3,0mm
New REAR Anti-roll Bar 3,0mm
NEW Anti-rollbars possible to use only together with X3S-52 Adjustable anti-roll bar ball end set Hong Nor is now launching a new height-adjustable anti-roll bar, which was used by 2023 GT champion Toni Gruber in the Sydney GT World...
4,90 € *
Art.: X3S-54-3.0
Covered Serrated Wheel Nuts (P1.25) Black (4 pcs)
Covered Serrated Wheel Nuts (P1.25) Black (4 pcs)
Texture design on the bottom of the nut allows wheel rims to be locked tightly
20,90 € *
Art.: 449-BK
Covered Serrated Wheel Nuts (P1.25) Red (4 pcs)
Covered Serrated Wheel Nuts (P1.25) Red (4 pcs)
Texture design on the bottom of the nut allows wheel rims to be locked tightly
20,90 € *
Art.: 449-R
1.4x6 -16mm Shock Body Damper Cylinder Piston Set (4 pcs)
1.4x6 -16mm Shock Body Damper Cylinder Piston Set (4 pcs)
Precise CNC Machined Cutting Makes the Shock Absorbed Action Smoother. Made From High Quality and Durable Material.
9,90 € *
Art.: 423D
1.3x6 - 16mm Shock Body Damper Cylinder Piston Set (4 pcs)
1.3x6 - 16mm Shock Body Damper Cylinder Piston Set (4 pcs)
Precise CNC Machined Cutting Makes the Shock Absorbed Action Smoother. Made From High Quality and Durable Material.
9,90 € *
Art.: 423C
CNC aluminum Servo Arm 23T
CNC aluminum Servo Arm 23T
For X3 series, Hong Nor developed new CNC aluminum alloy servo plate which strengthens the servo plate, improve the durability of the gears, and decrease the chance of overspin problems (available with 23T and 25T).
19,90 € *
Art.: X3S-50-23
CNC aluminum Servo Arm 25T
CNC aluminum Servo Arm 25T
For X3 series, Hong Nor developed new CNC aluminum alloy servo plate which strengthens the servo plate, improve the durability of the gears, and decrease the chance of overspin problems (available with 23T and 25T).
19,90 € *
Art.: X3S-50-25
Optional 13T Pinion Gear (only compatible with X3S-51A)
Optional 13T Pinion Gear (only compatible with X3S-51A)
11,90 € *
Art.: X3S-51B
Optional 46T Kegelrad (only compatible with X3S-51B)
Optional 46T Kegelrad (only compatible with X3S-51B)
29,90 € *
Art.: X3S-51A
Optional 13T+46T Gear Set
Optional 13T+46T Gear Set
35,90 € *
Art.: X3S-51
7075-T7 AL Steering System (2 pcs)
7075-T7 AL Steering System (2 pcs)
65,90 € *
Art.: X3S-33A
Carbon Steering Arm (2 pcs)
Carbon Steering Arm (2 pcs)
15,80 € *
Art.: X3S-33B
Screw Bag Set for X3GTS 2023
Screw Bag Set for X3GTS 2023
22,90 € *
Art.: X3GT-76
58T (2nd) Spur Gear (Hard) Modul 0.8
58T (2nd) Spur Gear (Hard) Modul 0.8
New reinforced material increases durability of the gears
10,90 € *
Art.: 429D-H
57T (2nd) Spur Gear (Hard) Modul 0.8
57T (2nd) Spur Gear (Hard) Modul 0.8
New reinforced material increases durability of the gears
10,90 € *
Art.: 428P-H
62T (1st) Spur Gear (Hard) Modul 0.8
62T (1st) Spur Gear (Hard) Modul 0.8
New reinforced material increases durability of the gears
10,90 € *
Art.: 429B-H
61T (1st) Spur Gear (Hard) Modul 0.8
61T (1st) Spur Gear (Hard) Modul 0.8
New reinforced material increases durability of the gears
10,90 € *
Art.: 428O-H
Screw Bag Set for X3GTS e 2023
Screw Bag Set for X3GTS e 2023
18,90 € *
Art.: X3GT-75
Carbon Akkuhalter set
Carbon Akkuhalter set
In Kooperation mit Rc Carbon Cavalieri haben wir nach einer schicken Lösung bzgl der Akku-Befestigung gesucht. Ergebnis ist dieses Set, welches quasi plug and play passt. Man muss lediglich den original Steg an der Kunststoffführung...
27,90 € *
Art.: K18004
Alum. Throttle Bell Crank (1 pcs)
Alum. Throttle Bell Crank (1 pcs)
19,90 € *
Art.: X3GT-69
Alum. Throttle Bell Crank Post
Alum. Throttle Bell Crank Post
4,90 € *
Art.: X3GT-68
Carbon Radio Plate Battery Holder (1 pcs)
Carbon Radio Plate Battery Holder (1 pcs)
9,90 € *
Art.: X3GT-67
Carbon Radio Plate (1 pcs)
Carbon Radio Plate (1 pcs)
55,90 € *
Art.: X3GT-66
Alum. Steering Servo Mount (2 pcs)
Alum. Steering Servo Mount (2 pcs)
13,90 € *
Art.: X3GT-65
Center Drive Shaft, 98mm (1 pcs)
Center Drive Shaft, 98mm (1 pcs)
9,90 € *
Art.: X3GT-63
CNC 7075 Chassis Brace (Rear)
CNC 7075 Chassis Brace (Rear)
25,90 € *
Art.: X3GT-62B
CNC 7075 Chassis Brace (Front)
CNC 7075 Chassis Brace (Front)
32,90 € *
Art.: X3GT-62A
Carbon 4mm Microsoft Rear Shock Tower
Carbon 4mm Microsoft Rear Shock Tower
47,90 € *
Art.: X3GT-64B
Counter Weight. 30g (1 pcs)
Counter Weight. 30g (1 pcs)
20,90 € *
Art.: X3GT-70
Carbon 4mm Microsoft Front Shock Tower
Carbon 4mm Microsoft Front Shock Tower
38,90 € *
Art.: X3GT-64A
Rear Carbon Shock Tower V2 4mm (20g)
Rear Carbon Shock Tower V2 4mm (20g)
Tuning-Dämpferbrücke für den Hong Nor Gtse 2023 und X3 GTS designed by Toni Gruber made in Deutschland von Thomas Rößle (Carbon cavalieri) Ziel war Schwerpunktsenkung und Gewichtsreduzierung, sowie eine bessere Performance. Für die...
32,90 € *
Art.: 18009
Rear Carbon Shock Tower V2 5mm (25g)
Rear Carbon Shock Tower V2 5mm (25g)
Tuning-Dämpferbrücke für den Hong Nor Gtse 2023 und X3 GTS designed by Toni Gruber made in Deutschland von Thomas Rößle (Carbon cavalieri) Ziel war Schwerpunktsenkung und Gewichtsreduzierung, sowie eine bessere Performance. Für die...
37,50 € *
Art.: 18011
Adjustable C-Hub
Adjustable C-Hub
72,90 € *
Art.: X3GT-71
Hong Nor Sticker Sheet 30x18cm
Hong Nor Sticker Sheet 30x18cm
4,90 € *
Art.: 420E
Adjustable Clutch-bell Alum. Nickel Coated GT
Adjustable Clutch-bell Alum. Nickel Coated GT
Light weight Clutch bell made of 7075 aluminum alloy material allows engines to run more efficiently with lower operating temperature!
26,90 € *
Art.: X3GT-61I
Center Diff Holder (2 pcs)
Center Diff Holder (2 pcs)
9,90 € *
Art.: X3.6-13B
Preload Spring Nut For Adjustable Clutch System
Preload Spring Nut For Adjustable Clutch System
6,90 € *
Art.: X3GT-61E
Adjustable GT Clutch Ring
Adjustable GT Clutch Ring
8,50 € *
Art.: X3GT-61D
Adjustable GT Clutch Shoe. Black
Adjustable GT Clutch Shoe. Black
24,90 € *
Art.: X3GT-61C
Center Clutchnut
Center Clutchnut
6,90 € *
Art.: X3GT-61B
Adjustable GT Clutch Flywheel 34mm
Adjustable GT Clutch Flywheel 34mm
14,50 € *
Art.: X3GT-61A
Adjustable GT Clutchbell Steel
Adjustable GT Clutchbell Steel
24,50 € *
Art.: X3GT-61F
6mm E-Clips (4)
6mm E-Clips (4)
1,70 € *
Art.: G-14C
Adjustable GT clutch set
Adjustable GT clutch set
The engine power output can be changed by adjusting the tightness of the clutch spring. We had many professional drivers tested with the new clutch. And all of them are surprised and satisfied with the increasing speed and excellent...
59,90 € *
Art.: X3GT-61
Mega Booster pre-painted Body
Mega Booster pre-painted Body
45,50 € *
Art.: XT-43A
Ligheweight Aluminium Ball Set, Hard-Coated (for X1)
Ligheweight Aluminium Ball Set, Hard-Coated (for X1)
30,90 € *
Art.: 398
2020 into 2023 - X3GTS.E Conversion KIT
2020 into 2023 - X3GTS.E Conversion KIT
Drivers can upgrade their 2020 X3GTSe to 2023 X3GTS-e by equipping the kit.
329,90 € *
Art.: X3GT-60
Brake Caliper Screw (4 pcs)
Brake Caliper Screw (4 pcs)
3,50 € *
Art.: 431
Extended exhaust tube fixed rod (11cm long)
Extended exhaust tube fixed rod (11cm long)
6,50 € *
Art.: 430
2nd Ball (pin 5x4.8) (2 pcs)
2nd Ball (pin 5x4.8) (2 pcs)
4,50 € *
Art.: 428K
16mm Front Shock Body (2 pcs)
16mm Front Shock Body (2 pcs)
25,80 € *
Art.: 418B
1/8 Nitro On-Road Air Filter 16mm (2 pcs)
1/8 Nitro On-Road Air Filter 16mm (2 pcs)
10,90 € *
Art.: 334
5x8x2.5 Ball Bearing
5x8x2.5 Ball Bearing
6,90 € *
Art.: 234Y
5x16 Bearing (metal cap) (2 pcs)
5x16 Bearing (metal cap) (2 pcs)
6,90 € *
Art.: X3S-37A
CNC Center Diff Brace AL
CNC Center Diff Brace AL
57,90 € *
Art.: X3S-36
Clutch bushing (extend)
Clutch bushing (extend)
6,50 € *
Art.: 428G
125.5mm Center Shaft (rear)
125.5mm Center Shaft (rear)
9,90 € *
Art.: XT-09B
Servo Fixing
Servo Fixing
8,90 € *
Art.: C-27
Steering Servo Saver, Alum
Steering Servo Saver, Alum
23,90 € *
Art.: X3GT-53
Diff. Case Dust Cover (2 pcs)
Diff. Case Dust Cover (2 pcs)
To keep stones out of the differential case, and to protect drivers' fingers from injury caused by inadvertent touch of the gears.
6,90 € *
Art.: X3GT-55
Servo Holder, Alum (2 pcs)
Servo Holder, Alum (2 pcs)
30,90 € *
Art.: X3GT-52
Center Diff Upper Cap, Alum
Center Diff Upper Cap, Alum
13,90 € *
Art.: X3GT-51
CNC 7075 Suspension Bracket, RF(+2°)
CNC 7075 Suspension Bracket, RF(+2°)
38,50 € *
Art.: X3GT-46
CNC Chassis Brace Mount
CNC Chassis Brace Mount
17,90 € *
Art.: X3GT-50
CNC 7075-3mm Light Weight Chassis
CNC 7075-3mm Light Weight Chassis
91,90 € *
Art.: X3GT-47
Rear Top Deck, Carbon
Rear Top Deck, Carbon
44,90 € *
Art.: X3GT-49
Front Top Deck, Carbon
Front Top Deck, Carbon
27,90 € *
Art.: X3GT-48
CNC 7075 Suspension Bracket, FR(+6°)
CNC 7075 Suspension Bracket, FR(+6°)
38,50 € *
Art.: X3GT-45
Fan Mounting Carbon Plate for 40mm Fan
Fan Mounting Carbon Plate for 40mm Fan
10,90 € *
Art.: X3GT-57
Balance Block, 20g
Balance Block, 20g
21,50 € *
Art.: X3GT-54
Battery Mount (set)
Battery Mount (set)
14,90 € *
Art.: 447
Antenna Holder
Antenna Holder
3,50 € *
Art.: 446
Battery Straps, Black (2 pcs)
Battery Straps, Black (2 pcs)
5,80 € *
Art.: 445
81.5mm Central Shaft (front)
81.5mm Central Shaft (front)
9,90 € *
Art.: X3GT-58
Long carbon plates (2pcs) (for set X3S-49)
Long carbon plates (2pcs) (for set X3S-49)
13,90 € *
Art.: X3S-49B
Short carbon plates (2pcs) (for set X3S-48)
Short carbon plates (2pcs) (for set X3S-48)
13,90 € *
Art.: X3S-48B
HN Car Maintenance Stand - 1/10 On-Road and 1/8 GT
HN Car Maintenance Stand - 1/10 On-Road and 1/8 GT
For 1/10 On-Road and 1/8 GT. Four holes on the side for holding 1/8 Shock bodies. Four holes on the top for holding 1/10 Shock bodies.
32,50 € *
Art.: 443
Carbon Rear Plates+Rear Hub  Alu. Set(GT)
Carbon Rear Plates+Rear Hub Alu. Set(GT)
Including Aluminium alloy rear hub and Carbon rear plates. Carbon rear plates contain more holes, and can be replaced separately.
59,90 € *
Art.: X3S-49
Carbon Rear Plates+Rear Hub  Alu. Set (Buggy)
Carbon Rear Plates+Rear Hub Alu. Set (Buggy)
Including Aluminium alloy rear hub and Carbon rear plates. Carbon rear plates contain more holes, and can be replaced separately.
59,90 € *
Art.: X3S-48
2-SPEED SET Modul 0.8
2-SPEED SET Modul 0.8
99,90 € *
Art.: 428
2nd Spring (2 pcs)
2nd Spring (2 pcs)
11,90 € *
Art.: 428L
8x12x3.5 Ball Bearing (2 pcs)
8x12x3.5 Ball Bearing (2 pcs)
6,50 € *
Art.: 428I
8x10x1.5mm AL bush
8x10x1.5mm AL bush
3,30 € *
Art.: 428F
2nd Spur Gear Holder
2nd Spur Gear Holder
22,90 € *
Art.: 428E
1st Spur Gear Holder
1st Spur Gear Holder
34,90 € *
Art.: 428D
2.5x11.8mm PIN (round head) (10 pcs)
2.5x11.8mm PIN (round head) (10 pcs)
3,90 € *
Art.: 428C
Clutch Shoe Carrier
Clutch Shoe Carrier
7,30 € *
Art.: 428B
2-Speed light weight Shaft
2-Speed light weight Shaft
7,90 € *
Art.: 428A
Clutch Screws (4 pcs)
Clutch Screws (4 pcs)
9,90 € *
Art.: 436D
Clutch Shoes (4 pcs)
Clutch Shoes (4 pcs)
29,90 € *
Art.: 436C
Clutch Nut
Clutch Nut
5,90 € *
Art.: 436B
Flywheel
Flywheel
32,90 € *
Art.: 436A
Clutch Spring 1.0mm (4 pcs)
Clutch Spring 1.0mm (4 pcs)
4,50 € *
Art.: 436F
Clutch Spring 1.1mm (4 pcs)
Clutch Spring 1.1mm (4 pcs)
4,50 € *
Art.: 436G
Clutch Spring 0.9mm (4 pcs)
Clutch Spring 0.9mm (4 pcs)
4,50 € *
Art.: 436E
Front Arm Bushing (4 pcs)
Front Arm Bushing (4 pcs)
5,90 € *
Art.: X3-45B
Front Lower Arms L&R (NEW) use with X3-45B
Front Lower Arms L&R (NEW) use with X3-45B
9,90 € *
Art.: X3-45
4x35 Turnbuckle (2pcs) use only together with X3S-44
4x35 Turnbuckle (2pcs) use only together with X3S-44
10,90 € *
Art.: X3S-44C
Engine Mount (2 pcs)
Engine Mount (2 pcs)
15,50 € *
Art.: XT-24
3 Shoe Clutch carbon
3 Shoe Clutch carbon
13,50 € *
Art.: 174B
Receiver Box
Receiver Box
9,90 € *
Art.: X1-41
Aluminium Servo Horn (L/R)
Aluminium Servo Horn (L/R)
44,90 € *
Art.: X3S-44A
Carbon Servo Saver Connecting Plate
Carbon Servo Saver Connecting Plate
16,50 € *
Art.: X3S-44B
Aluminium Servo Saver Set
Aluminium Servo Saver Set
This X3S-44 AL Aluminum Servo Set can effectively reduce tire vibration and also keeps the vehicle stable when cornering at high speed. X3S-44 AL Aluminum Servo Saver Set ** X3S-44A-L Aluminum Servo Horn L x 1 pc ** X3S-44A-R Aluminum...
59,90 € *
Art.: X3S-44-AL
CNC Alum. Servo Saver Connecting Plate
CNC Alum. Servo Saver Connecting Plate
This X3S-44 AL Aluminum Servo Set can effectively reduce tire vibration and also keeps the vehicle stable when cornering at high speed. And X3S-44D CNC Alum. Servo Saver Connecting Plate only applicable for X3S-44 AL.
11,90 € *
Art.: X3S-44D
360mm Chassis Set (for Car 64009)
360mm Chassis Set (for Car 64009)
This new chassis length increased for 30mm which make the original 325mm~330mm wheelbase changed to 355mm~360mm. This longer wheelbase chassis will be more suitable for a car shell which is scaled down with the real car and also make the...
82,90 € *
Art.: X3GT-44
CVD Wheel Axle 7075 Alum. (2pcs)
CVD Wheel Axle 7075 Alum. (2pcs)
This part is made by 7075 aluminum alloy material and with hard anodizing for surface, which can prolong the durability of this parts, and also lighter the weight of this part and make the car to speed up much easier.
18,90 € *
Art.: X3S-45
16mm Shock Body Damper Cylinder Rod Guide Set
16mm Shock Body Damper Cylinder Rod Guide Set
5,90 € *
Art.: 424
Aluminium Shock Top Post/Hard Coated (4 pcs)
Aluminium Shock Top Post/Hard Coated (4 pcs)
11,90 € *
Art.: 391
16mm Shock Spring/Blue/Hard-Truggy (4 pcs)
16mm Shock Spring/Blue/Hard-Truggy (4 pcs)
14,50 € *
Art.: 390B
CNC 7075-T6 Front C Hub (Set)
CNC 7075-T6 Front C Hub (Set)
67,90 € *
Art.: X1S-53
CNC 7075-T6 Rear Hub + Bearing (2 pcs)
CNC 7075-T6 Rear Hub + Bearing (2 pcs)
59,90 € *
Art.: X1S-51
CNC 7075-T6 Servo Saver Connetctor
CNC 7075-T6 Servo Saver Connetctor
16,90 € *
Art.: X1S-49
Center CVD Shaft Set Lightweight (F+R)
Center CVD Shaft Set Lightweight (F+R)
48,50 € *
Art.: XTS-19
Lightweight front CVD Shaft Set
Lightweight front CVD Shaft Set
48,50 € *
Art.: XTS-18
Center CVD Shaft Set (F+R)
Center CVD Shaft Set (F+R)
39,90 € *
Art.: XTS-15
CNC 7075-T6 Alum. Center Brace Set (F+R)
CNC 7075-T6 Alum. Center Brace Set (F+R)
51,90 € *
Art.: XTS-14
CNC 707075-T6 Alum. Lightweight Chassis
CNC 707075-T6 Alum. Lightweight Chassis
107,90 € *
Art.: XTS-21
CNC 7075-T6 4mm Rear Shock Tower
CNC 7075-T6 4mm Rear Shock Tower
28,80 € *
Art.: XTS-03
CNC7075-T6 4mm Front Shock Tower
CNC7075-T6 4mm Front Shock Tower
28,80 € *
Art.: XTS-02
48T Lightweight Spur Gear
48T Lightweight Spur Gear
47,90 € *
Art.: X1S-59
Lightweight Brake Cup Joint (2 pcs)
Lightweight Brake Cup Joint (2 pcs)
13,90 € *
Art.: X1S-45
Lightweight Diff. Cup joint (2 pcs)
Lightweight Diff. Cup joint (2 pcs)
15,50 € *
Art.: X1S-39
CNC 7075-T6 Anti-Squart 3 Degree
CNC 7075-T6 Anti-Squart 3 Degree
13,90 € *
Art.: X1S-30
CNC 7075-T6 Anti-Squart 2 Degree
CNC 7075-T6 Anti-Squart 2 Degree
13,90 € *
Art.: X1S-29
CNC 7075-T6 Anti-Squart 1 Degree
CNC 7075-T6 Anti-Squart 1 Degree
13,90 € *
Art.: X1S-28
CNC 7075-T6 Front Lower Arm Holder (B)
CNC 7075-T6 Front Lower Arm Holder (B)
19,90 € *
Art.: X1S-26
CNC 7075-T6 Front Upper Arm Holder (B)
CNC 7075-T6 Front Upper Arm Holder (B)
19,90 € *
Art.: X1S-25
CNC 7075-T6 Lower Arm Holder (A)
CNC 7075-T6 Lower Arm Holder (A)
19,90 € *
Art.: X1S-24
Alum. Wing Stay Post (3 pcs)
Alum. Wing Stay Post (3 pcs)
8,90 € *
Art.: X1S-18
Alum. Radio Tray Post (2 pcs)
Alum. Radio Tray Post (2 pcs)
5,50 € *
Art.: X1S-17
CNC Rear Toe-IN 3.5 Degree
CNC Rear Toe-IN 3.5 Degree
13,90 € *
Art.: X1S-14
CNC Rear Toe-In Block 3 Degree
CNC Rear Toe-In Block 3 Degree
13,90 € *
Art.: X1S-13
CNC Rear Toe-In Block 2.5 degree
CNC Rear Toe-In Block 2.5 degree
13,90 € *
Art.: X1S-12
CNC 7075-T6 Steering Knuckle (2 pcs)
CNC 7075-T6 Steering Knuckle (2 pcs)
64,90 € *
Art.: X1S-07
CNC 7075-T6 Upper Arm Holder (A)
CNC 7075-T6 Upper Arm Holder (A)
19,90 € *
Art.: X1S-23
Screw Type Arm Shaft 4mmx73mm (4 pcs)
Screw Type Arm Shaft 4mmx73mm (4 pcs)
15,90 € *
Art.: X1S-19C
Screw Type Arm Shaft 3mmx48.1mm (4 pcs)
Screw Type Arm Shaft 3mmx48.1mm (4 pcs)
11,90 € *
Art.: X1S-19B
Screw Type Arm Shaft 3mmx42.7mm (4 pcs)
Screw Type Arm Shaft 3mmx42.7mm (4 pcs)
11,90 € *
Art.: X1S-19A
Screw Type Arm Shaft Set
Screw Type Arm Shaft Set
31,90 € *
Art.: X1S-19
Hong Nor Work Bench Mat  950x600MM
Hong Nor Work Bench Mat 950x600MM
49,90 € *
Art.: 441
Carbon Battery Cover (1 pcs)
Carbon Battery Cover (1 pcs)
39,90 € *
Art.: X3S-47
Carbon Receiver Cover (1 pcs)
Carbon Receiver Cover (1 pcs)
24,90 € *
Art.: X3S-46
HN Pit Caddy
HN Pit Caddy
Using Hong Nor new R/C Pit Bag will give you a refreshing feeling on the track. The large capacity allows you to carry any of your repair tools, fuel, starter box, fuel bottle and fuel gun, and whatever items you want to bring to the pit...
61,90 € *
Art.: 444
Clutch Bell 2-Speed Alum Nickel Coated GT (for Modul 0.8)
Clutch Bell 2-Speed Alum Nickel Coated GT (for Modul 0.8)
It is recommended to be used for bumpy and dirty places as this item remove the lightweight / vented design to stop rocks come in and make it more durable
26,90 € *
Art.: 429K
Carbon Front Plate
Carbon Front Plate
25,90 € *
Art.: X1S-05
Universal Servo Horn (BLACK)
Universal Servo Horn (BLACK)
6,90 € *
Art.: 312
Alum. Wheel Hub, 15mm (4 pcs)
Alum. Wheel Hub, 15mm (4 pcs)
17,90 € *
Art.: 352BK
X2CRT 6061Chassis, Hard-Coated
X2CRT 6061Chassis, Hard-Coated
61,90 € *
Art.: XT-37
Mega Booster -Clear Body-
Mega Booster -Clear Body-
39,90 € *
Art.: XT-43
Center Drive Shaft 104+141mm
Center Drive Shaft 104+141mm
15,90 € *
Art.: XT-38
Complete Diff. Set (Front/Rear)
Complete Diff. Set (Front/Rear)
41,50 € *
Art.: XT-36
New Servo Saver Spring
New Servo Saver Spring
2,50 € *
Art.: XT-35
X2 CRT Screw Bags (Set)
X2 CRT Screw Bags (Set)
15,90 € *
Art.: XT-34
16mm Shock Spring / Grey / Soft-Truggy (4 pcs)
16mm Shock Spring / Grey / Soft-Truggy (4 pcs)
14,50 € *
Art.: 390A
Shock Ball End Post (long) (4 pcs)
Shock Ball End Post (long) (4 pcs)
8,90 € *
Art.: 387I
3 x 28mm Cap Screws (4 pcs)
3 x 28mm Cap Screws (4 pcs)
1,65 € *
Art.: 387H
Antenna Pipe Fixing Nut
Antenna Pipe Fixing Nut
1,90 € *
Art.: 364
Body Post / Skid Plate / Tank Post
Body Post / Skid Plate / Tank Post
12,30 € *
Art.: XT-30
Stone Guard (R&L)
Stone Guard (R&L)
12,30 € *
Art.: XT-28
Spiral Bevel Gear (10T)
Spiral Bevel Gear (10T)
12,30 € *
Art.: XT-27
Spiral Bevel Gear (45T)
Spiral Bevel Gear (45T)
29,90 € *
Art.: XT-26
Plastic Chassis Brace , F&R
Plastic Chassis Brace , F&R
9,90 € *
Art.: XT-29
CNC Alu Motor Mount, 3pcs
CNC Alu Motor Mount, 3pcs
44,50 € *
Art.: X2S-16A
Universal Joint, Front or Rear (2 pcs)
Universal Joint, Front or Rear (2 pcs)
39,90 € *
Art.: XT-08
Truggy Bumper
Truggy Bumper
12,50 € *
Art.: XT-19
Lower Arms Front / Rear (2 pcs)
Lower Arms Front / Rear (2 pcs)
15,90 € *
Art.: XT-18
Front Upper Arms
Front Upper Arms
7,90 € *
Art.: XT-17
Turnbuckle 5x80mm (2 pcs)
Turnbuckle 5x80mm (2 pcs)
7,90 € *
Art.: XT-12
Turnbuckle 4x80mm (2 pcs)
Turnbuckle 4x80mm (2 pcs)
7,90 € *
Art.: XT-11
Rear Drive Shaft, 137mm (2 pcs)
Rear Drive Shaft, 137mm (2 pcs)
16,50 € *
Art.: XT-10
4mm Rear Lower Arm Holder (AL7075-Black)
4mm Rear Lower Arm Holder (AL7075-Black)
11,50 € *
Art.: XT-06BK
4mm Front Lower Arm Holder (AL7075-Black)
4mm Front Lower Arm Holder (AL7075-Black)
11,50 € *
Art.: XT-05BK
4mm Rear Shock Tower
4mm Rear Shock Tower
14,50 € *
Art.: XT-03B
1 von 3
Zuletzt angesehen