CNC Motor Mount (2 pcs)

HONG NOR
CNC Motor Mount (2 pcs)
47,90 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-2 Werktage

  • Artikel-Nr.: 415
Beschreibung Bewertungen 0
Beschreibung
mehr
Menü schließen
Produktinformationen "CNC Motor Mount (2 pcs)"
"CNC Motor Mount (2 pcs)"

Verantwortlicher nach GPSR / person responsible GPSR

Gruber-Racing

Thiergartner Weg 14

08527 Plauen

info@gruber-racing.de

www.gruber-racing.de

Hersteller / Manufacturer

Hong Nor Hobbies International Co., Ltd.

8F.,No.184, Sec. 4,Chengde Rd.,

Shihlin Dist., Taipei 11167, Taiwan

Tel:+886-2-2888-1221

Hong Nor Hobbies International Co., Ltd.

e-mail:hong_nor@hci-rc.com

ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet

wegen verschluckbarer Kleinteile, Erstickungsgefahr.
CAUTION: Not suitable for children under 36 months

due to small parts that can be swallowed, choking hazard.

 

ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet.

Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
CAUTION: Not suitable for children under 14 years of age.

Use under the direct supervision of adults.


Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements

  • H 315: Verursacht Hautreizungen (Causes skin irritation)

  • H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)

  • H 335: Kann die Atemwege reizen (May irritate the respiratory tract)

Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements

  • P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)

  • P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aerosol vermeiden.

    (Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)

  • P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)

  • P 280: Schutzhandschuhe / Schutzkleidung / Augenschutz / Gesichtsschutz tragen. (Wear protective gloves /

    protective clothing / eye protection / face protection.)

  • P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen.

    Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes:

    Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)

  • P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)

  • P 405: Unter Verschluss aufbewahren. (Store under lock and key.)

  • P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)

Sicherheitshinweise / EUH | Safety instructions / EUH

  • EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen.

    Darf nicht in die Hände von Kindern gelangen. 



Bewertungen 0
Bewertungen lesen, schreiben und diskutieren... mehr
Menü schließen
Kundenbewertungen für "CNC Motor Mount (2 pcs)"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Kunden kauften auch Kunden haben sich ebenfalls angesehen
Kunden kauften auch
Alum. Nut (clockwise) (1 pcs) Alum. Nut (clockwise) (1 pcs)
5,90 € *
Art.: 309B
Body Mount Set Front and Rear Body Mount Set Front and Rear
7,90 € *
Art.: X3-84
125.5mm Center Shaft (rear) 125.5mm Center Shaft (rear)
9,90 € *
Art.: XT-09B
81.5mm Central Shaft (front) 81.5mm Central Shaft (front)
9,90 € *
Art.: X3GT-58
GT Shock Shafts for front & rear titatium coated (2 pcs) GT Shock Shafts for front & rear titatium coated (2 pcs)
9,90 € *
Art.: 418A-T
1/8 Electric Conversion Kit / Plastic Parts 1/8 Electric Conversion Kit / Plastic Parts
15,90 € *
Art.: 395
Main Cup Joint Axle Main Cup Joint Axle
13,90 € *
Art.: X3GT-39
Cup Joint For Planet Gear (2 pcs) Cup Joint For Planet Gear (2 pcs)
16,90 € *
Art.: X3GT-40
Single Spur Gear Mount (for 47-49T) Single Spur Gear Mount (for 47-49T)
25,90 € *
Art.: DM-27
T-Works - Steel - Rear 96,4mm - CVD Set (2 Stück) T-Works - Steel - Rear 96,4mm - CVD Set (2 Stück)
49,90 € *
Art.: C-X3-R
Hong Nor GT Stoßdämpfer Set Hong Nor GT Stoßdämpfer Set
71,90 € *
Art.: 418S
Silicon Joint Cover (4 pcs) Silicon Joint Cover (4 pcs)
5,90 € *
Art.: 326
ITD Brushless Motor 2650kV On-Road for Hong Nor ITD Brushless Motor 2650kV On-Road for Hong Nor
129,00 € *
Art.: IT40004-HongNorSpec
Rear Lower Arms L&R (Hard) Rear Lower Arms L&R (Hard)
13,90 € *
Art.: X3-53H
Adjustable anti-roll bar ball end set (for NEW roll bars) Adjustable anti-roll bar ball end set (for NEW roll bars)
6,50 € *
Art.: X3S-52
New FRONT Anti-roll Bar 2,0mm New FRONT Anti-roll Bar 2,0mm
4,50 € *
Art.: X3S-53-2.0
New FRONT Anti-roll Bar 2,3mm New FRONT Anti-roll Bar 2,3mm
4,50 € *
Art.: X3S-53-2.3
New FRONT Anti-roll Bar 2,5mm New FRONT Anti-roll Bar 2,5mm
4,50 € *
Art.: X3S-53-2.5
New FRONT Anti-roll Bar 2,8mm New FRONT Anti-roll Bar 2,8mm
4,90 € *
Art.: X3S-53-2.8
New REAR Anti-roll Bar 2,5mm New REAR Anti-roll Bar 2,5mm
4,50 € *
Art.: X3S-54-2.5
New REAR Anti-roll Bar 2,8mm New REAR Anti-roll Bar 2,8mm
4,90 € *
Art.: X3S-54-2.8
New REAR Anti-roll Bar 3,0mm New REAR Anti-roll Bar 3,0mm
4,90 € *
Art.: X3S-54-3.0
Covered Serrated Wheel Nuts (P1.25) Red (4 pcs) Covered Serrated Wheel Nuts (P1.25) Red (4 pcs)
20,90 € *
Art.: 449-R
1.4x6 -16mm Shock Body Damper Cylinder Piston Set (4 pcs) 1.4x6 -16mm Shock Body Damper Cylinder Piston Set (4 pcs)
9,90 € *
Art.: 423D
Optional 13T+46T Gear Set Optional 13T+46T Gear Set
35,90 € *
Art.: X3S-51
GRP GTX03-XM2 1/8 GT Räder - Super Soft (2) GRP GTX03-XM2 1/8 GT Räder - Super Soft (2)
20,99 € *
Art.: GTX03-XM2
GRP GTX03-XM3 1/8 GT Räder - Soft (2) GRP GTX03-XM3 1/8 GT Räder - Soft (2)
20,99 € *
Art.: GTX03-XM3
Adjustable C-Hub Adjustable C-Hub
72,90 € *
Art.: X3GT-71
6mm E-Clips (4) 6mm E-Clips (4)
1,70 € *
Art.: G-14C
Sturzlehre und Höhenlehre Sturzlehre und Höhenlehre
7,50 € *
Art.: RA50381
16mm Front Shock Body (2 pcs) 16mm Front Shock Body (2 pcs)
25,80 € *
Art.: 418B
5x16 Bearing (metal cap) (2 pcs) 5x16 Bearing (metal cap) (2 pcs)
6,90 € *
Art.: X3S-37A
Steering Servo Saver, Alum Steering Servo Saver, Alum
23,90 € *
Art.: X3GT-53
Center Diff Upper Cap, Alum Center Diff Upper Cap, Alum
13,90 € *
Art.: X3GT-51
Balance Block, 20g (Hong Nor) Balance Block, 20g (Hong Nor)
21,50 € *
Art.: X3GT-54
Battery Mount (set) Battery Mount (set)
14,90 € *
Art.: 447
Battery Straps, Black (2 pcs) Battery Straps, Black (2 pcs)
5,80 € *
Art.: 445
Peakeater AB6s4000µf (für 1/8 GT) - Neue Version 2025 Peakeater AB6s4000µf (für 1/8 GT) - Neue Version 2025
25,50 € *
Art.: AB6s4000
360mm Chassis Set (for Car 64009) 360mm Chassis Set (for Car 64009)
82,90 € *
Art.: X3GT-44
16mm Shock Body Damper Cylinder Rod Guide Set 16mm Shock Body Damper Cylinder Rod Guide Set
5,90 € *
Art.: 424
Kunden haben sich ebenfalls angesehen
Mayako - Steel M4 Threaded Ball for Front Brace with M4x18 Screw and M4 Nut, for Mayako MX8E Mayako - Steel M4 Threaded Ball for Front Brace with M4x18 Screw and M4...
6,99 € *
Art.: MYE0024
ITD - "Corsa" - 1/10 nitro onroad Motor .12 - 3 Kanal ITD - "Corsa" - 1/10 nitro onroad Motor .12 - 3 Kanal
439,90 € *
Art.: ITD-Corsa
ITD - "GranTurismo" - 1/8 GT nitro onroad Motor .21 - 5 Kanal ITD - "GranTurismo" - 1/8 GT nitro onroad Motor .21 - 5 Kanal
459,90 € *
Art.: ITD-GranTurismo
Corsatec - ESC "CTX-10RS" - Race Pro 1/10 - 220A Corsatec - ESC "CTX-10RS" - Race Pro 1/10 - 220A
227,90 € *
Art.: CT30010
Corsatec - ESC "CTX-8RS" - Race Pro 1/8 - 250A (Black Edition) Corsatec - ESC "CTX-8RS" - Race Pro 1/8 - 250A (Black Edition)
197,90 € * 227,90 € *
Art.: CT30001BK
Rear Wing (Black) Rear Wing (Black)
14,90 € *
Art.: 452-B
T-Works 1/10 Chassis Bag (30x50cm) (Style-B) T-Works 1/10 Chassis Bag (30x50cm) (Style-B)
10,90 € *
Art.: TT-115-B
Fuel Tank Fuel Tank
25,90 € *
Art.: X5-28
X5B - Clear Body X5B - Clear Body
29,90 € *
Art.: X5-29
X5B 2025 - 1:8 Competition 4WD Nitro Offroad Buggy X5B 2025 - 1:8 Competition 4WD Nitro Offroad Buggy
649,90 € *
Art.: 64026
SkyRC D750 MIX Ladegerät LiPo 1-8s 32A 500W AC SkyRC D750 MIX Ladegerät LiPo 1-8s 32A 500W AC
219,45 € * 231,00 € *
Art.: SK100201-01
O.S. Pleuel B2101,B2104, 21ZX-B B21 Buggy O.S. Pleuel B2101,B2104, 21ZX-B B21 Buggy
31,50 € *
Art.: OS-22425003
マヤコ Mayako MX8-24 1:8 GP 4WD Nitro Buggy マヤコ Mayako MX8-24 1:8 GP 4WD Nitro Buggy
539,99 € * 599,99 € *
Art.: MYB0377-24
T-Works 5mm Goldstecker mit Alum. Quick Lock Griffstücken (- schwarz / + schwarz) (2 Stück) T-Works 5mm Goldstecker mit Alum. Quick Lock Griffstücken (- schwarz / +...
9,90 € *
Art.: EA-042-5-BB
Gruber-Racing Team Sweatshirt - Schwarz Gruber-Racing Team Sweatshirt - Schwarz
32,50 € *
Art.: GR-SW-Shirt-L
LRP - 1/12 Hyper LCG Stock Spec 7400mAh 1S LiPo Akku - 3.7V - 140C/70C GRAPHENE-4.2 LRP - 1/12 Hyper LCG Stock Spec 7400mAh 1S LiPo Akku - 3.7V - 140C/70C...
75,11 € * 79,90 € *
Art.: 433270
Mayako - M3 x 23mm Counter Sunk (10pcs) Mayako - M3 x 23mm Counter Sunk (10pcs)
6,99 € *
Art.: MYH0016
Mayako - D-Block 1.5deg (57), for Mayako MX8 Mayako - D-Block 1.5deg (57), for Mayako MX8
23,99 € *
Art.: MYB0030-03A
マヤコ Mayako MX8E-25 (Limited Edition) 1:8 EP 4WD Elektro Buggy マヤコ Mayako MX8E-25 (Limited Edition) 1:8 EP 4WD Elektro Buggy
899,99 € *
Art.: MYE0377-25LE
Mayako - Plastic Centre Diff Mount for Mayako MX8 Mayako - Plastic Centre Diff Mount for Mayako MX8
9,99 € *
Art.: MYB0109
Mayako - 5x10x4mm Metal Shielded Ball Bearing – MXP High Performance (4 pcs) Mayako - 5x10x4mm Metal Shielded Ball Bearing – MXP High Performance (4...
12,99 € *
Art.: MYB0165MXP
Mayako - Screw Type Inner Hinge Pin for Mayako MX8 with M4 Nuts (2 pcs) Mayako - Screw Type Inner Hinge Pin for Mayako MX8 with M4 Nuts (2 pcs)
14,99 € *
Art.: MYB0032-02
Mayako - 6x13x5mm Ball Bearing for Mayako MX8 (4 pcs) Mayako - 6x13x5mm Ball Bearing for Mayako MX8 (4 pcs)
6,99 € *
Art.: MYB0166
マヤコ Mayako MX8E-25 1:8 EP 4WD Elektro Buggy マヤコ Mayako MX8E-25 1:8 EP 4WD Elektro Buggy
599,99 € *
Art.: MYE0377-25
SkyRC Q200 Neo LiPo 1-6s 10A 200W AC SkyRC Q200 Neo LiPo 1-6s 10A 200W AC
159,90 € *
Art.: SK100197-01
Gruber-Racing - Tischunterlage - 120 x 70cm Gruber-Racing - Tischunterlage - 120 x 70cm
1,00 € * 15,00 € *
Art.: GR-Pit-Towel
Diff. Case Dust Cover (3d printed) Version 2 Diff. Case Dust Cover (3d printed) Version 2
11,90 € *
Art.: Diffcover3D
NOSRAM HV Mid Size Modified GRAPHENE-4.1 7000mAh Hardcase Akku - 7.6V LiPo - 120C/60C NOSRAM HV Mid Size Modified GRAPHENE-4.1 7000mAh Hardcase Akku - 7.6V...
85,41 € * 89,90 € *
Art.: 999749
HV STOCK SPEC GRAPHENE-4 7400MAH AKKU - 7.6V LIPO - 135C/65C HV STOCK SPEC GRAPHENE-4 7400MAH AKKU - 7.6V LIPO - 135C/65C
95,86 € * 100,90 € *
Art.: 431276
Front/Rear Differential Set (46T version) Front/Rear Differential Set (46T version)
39,90 € *
Art.: X3-97
Fixing Pin (2 pcs) for X3GT-71 Fixing Pin (2 pcs) for X3GT-71
5,90 € *
Art.: X3GT-71E
1/8 High Down Force Wing (Red) 1/8 High Down Force Wing (Red)
14,50 € *
Art.: 380R
1/8 Buggy Tire Mount cone 1/8 Buggy Tire Mount cone
35,90 € *
Art.: PW0113
Mega Booster pre-painted Body Mega Booster pre-painted Body
45,50 € *
Art.: XT-43A
Servo Saver Plate for HB 817 series Servo Saver Plate for HB 817 series
26,40 € *
Art.: POHB02
TIPP
X3GTS-E 1/8 GT Electric Pro Kit X3GTS-E 1/8 GT Electric Pro Kit
799,90 € *
Art.: 64023
HN Car Maintenance Stand - 1/10 On-Road and 1/8 GT HN Car Maintenance Stand - 1/10 On-Road and 1/8 GT
32,50 € *
Art.: 443
Dogbone Shaft Replacement tool Dogbone Shaft Replacement tool
39,90 € *
Art.: PW0130
Alum. Wheel Hub, 15mm (4 pcs) Alum. Wheel Hub, 15mm (4 pcs)
17,90 € *
Art.: 352BK
CNC Alu Motor Mount, 3pcs CNC Alu Motor Mount, 3pcs
44,50 € *
Art.: X2S-16A
Zuletzt angesehen