Clutch Spring For Adjustable Clutch System (Hard)

HONG NOR
Clutch Spring For Adjustable Clutch System (Hard)
5,90 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-2 Werktage

  • Artikel-Nr.: X3GT-61H
Beschreibung
Beschreibung
mehr
Menü schließen
Produktinformationen "Clutch Spring For Adjustable Clutch System (Hard)"
"Clutch Spring For Adjustable Clutch System (Hard)"

Verantwortlicher nach GPSR / person responsible GPSR

Gruber-Racing

Thiergartner Weg 14

08527 Plauen

info@gruber-racing.de

www.gruber-racing.de

Hersteller / Manufacturer

Hong Nor Hobbies International Co., Ltd.

8F.,No.184, Sec. 4,Chengde Rd.,

Shihlin Dist., Taipei 11167, Taiwan

Tel:+886-2-2888-1221

Hong Nor Hobbies International Co., Ltd.

e-mail:hong_nor@hci-rc.com

ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet

wegen verschluckbarer Kleinteile, Erstickungsgefahr.
CAUTION: Not suitable for children under 36 months

due to small parts that can be swallowed, choking hazard.

 

ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet.

Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
CAUTION: Not suitable for children under 14 years of age.

Use under the direct supervision of adults.


Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements

  • H 315: Verursacht Hautreizungen (Causes skin irritation)

  • H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)

  • H 335: Kann die Atemwege reizen (May irritate the respiratory tract)

Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements

  • P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)

  • P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aerosol vermeiden.

    (Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)

  • P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)

  • P 280: Schutzhandschuhe / Schutzkleidung / Augenschutz / Gesichtsschutz tragen. (Wear protective gloves /

    protective clothing / eye protection / face protection.)

  • P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen.

    Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes:

    Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)

  • P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)

  • P 405: Unter Verschluss aufbewahren. (Store under lock and key.)

  • P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)

Sicherheitshinweise / EUH | Safety instructions / EUH

  • EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen.

    Darf nicht in die Hände von Kindern gelangen. 



Kunden kauften auch Kunden haben sich ebenfalls angesehen
Kunden kauften auch
62T (1st) Spur Gear (Hard) Modul 0.8 62T (1st) Spur Gear (Hard) Modul 0.8
10,90 € *
Art.: 429B-H
Adjustable GT Clutch Ring Adjustable GT Clutch Ring
8,50 € *
Art.: X3GT-61D
Adjustable GT Clutch Shoe. Black Adjustable GT Clutch Shoe. Black
25,90 € *
Art.: X3GT-61C
Front Lower Arms L&R (Hard) use with X3-45B Front Lower Arms L&R (Hard) use with X3-45B
13,90 € *
Art.: X3-45H
2-Speed light weight Shaft 2-Speed light weight Shaft
7,90 € *
Art.: 428A
SPL Special Brake Pad for 1/8 cars (2 pcs) SPL Special Brake Pad for 1/8 cars (2 pcs)
16,50 € *
Art.: 355
HN - Suspension Bracket Insert - Aufhängung Einsätze (Black) HN - Suspension Bracket Insert - Aufhängung Einsätze (Black)
9,90 € *
Art.: X3-46
Spiral Bevel Gear 13T (compatible with X3S-56A) Spiral Bevel Gear 13T (compatible with X3S-56A)
14,90 € *
Art.: X3S-56B
Shock Spring (Yellow) - Soft (S) - (0,66 kg/mm) - 35x16mm (2 pcs) Shock Spring (Yellow) - Soft (S) - (0,66 kg/mm) - 35x16mm (2 pcs)
8,90 € *
Art.: X3GT-84S-2
Adjustable GT Clutch Set (Aluminium Bell) Adjustable GT Clutch Set (Aluminium Bell)
63,90 € *
Art.: X3GT-61-AL
Rear Lower Arms L&R (Hard) Rear Lower Arms L&R (Hard)
13,90 € *
Art.: X3-53H
New FRONT Anti-roll Bar 2,8mm New FRONT Anti-roll Bar 2,8mm
4,90 € *
Art.: X3S-53-2.8
New REAR Anti-roll Bar 2,8mm New REAR Anti-roll Bar 2,8mm
4,90 € *
Art.: X3S-54-2.8
Optional 13T Pinion Gear (only compatible with X3S-51A) Optional 13T Pinion Gear (only compatible with X3S-51A)
11,90 € *
Art.: X3S-51B
58T (2nd) Spur Gear (Hard) Modul 0.8 58T (2nd) Spur Gear (Hard) Modul 0.8
10,90 € *
Art.: 429D-H
57T (2nd) Spur Gear (Hard) Modul 0.8 57T (2nd) Spur Gear (Hard) Modul 0.8
10,90 € *
Art.: 428P-H
Extended exhaust tube fixed rod (11cm long) Extended exhaust tube fixed rod (11cm long)
6,50 € *
Art.: 430
Clutch Shoe (2nd) (2 pcs) Clutch Shoe (2nd) (2 pcs)
20,90 € *
Art.: 428J
8mm Brake Cap Joint (2 pcs) 8mm Brake Cap Joint (2 pcs)
10,90 € *
Art.: JS-38B
Center CVD Drive Shaft Set(Rear)98mm Center CVD Drive Shaft Set(Rear)98mm
24,50 € *
Art.: X3.6-15
Cup Joint For Planet Gear (2 pcs) Cup Joint For Planet Gear (2 pcs)
16,90 € *
Art.: X3GT-40
18T (1st) Clutch Gear Modul 0.8 18T (1st) Clutch Gear Modul 0.8
9,90 € *
Art.: 429F
3mm Carbon rear shock end plate (2 pcs) 3mm Carbon rear shock end plate (2 pcs)
14,50 € *
Art.: X3GT-18D
Spiral Bevel Gear 44T (compatible with X3S-56B) Spiral Bevel Gear 44T (compatible with X3S-56B)
33,90 € *
Art.: X3S-56A
Diff. Case Dust Cover (3d printed) Version 2 Diff. Case Dust Cover (3d printed) Version 2
11,90 € *
Art.: Diffcover3D
Carbon Graphite Rear Body Mount (Set) for X3-GTS Carbon Graphite Rear Body Mount (Set) for X3-GTS
24,90 € *
Art.: X3GT-83
1/8 Exhaust Gasket. (4Pcs) 1/8 Exhaust Gasket. (4Pcs)
8,90 € *
Art.: 451
Clutch Spring For Adjustable Clutch System (Soft) Clutch Spring For Adjustable Clutch System (Soft)
5,90 € *
Art.: X3GT-61G
Silicon Joint Cover (4 pcs) Silicon Joint Cover (4 pcs)
5,90 € *
Art.: 326
New REAR Anti-roll Bar 3,0mm New REAR Anti-roll Bar 3,0mm
4,90 € *
Art.: X3S-54-3.0
1.4x6 -16mm Shock Body Damper Cylinder Piston Set (4 pcs) 1.4x6 -16mm Shock Body Damper Cylinder Piston Set (4 pcs)
9,90 € *
Art.: 423D
Center Drive Shaft, 98mm (1 pcs) Center Drive Shaft, 98mm (1 pcs)
9,90 € *
Art.: X3GT-63
Adjustable GT Clutch Flywheel 34mm Adjustable GT Clutch Flywheel 34mm
14,50 € *
Art.: X3GT-61A
Clutch Shoe Carrier Clutch Shoe Carrier
7,30 € *
Art.: 428B
1st Spur Gear Holder 1st Spur Gear Holder
34,90 € *
Art.: 428D
Hong Nor 1/8 Krümmer Feder Set (3 Stück) Hong Nor 1/8 Krümmer Feder Set (3 Stück)
3,20 € *
Art.: PI-801C
Aluminium Shock Body Seal Retainer (4 pcs) (4g) Aluminium Shock Body Seal Retainer (4 pcs) (4g)
14,90 € *
Art.: 440
8mm Lightweight Cap joint for brake (2 pcs) (18g) 8mm Lightweight Cap joint for brake (2 pcs) (18g)
13,90 € *
Art.: 435
23T (2nd) Clutch Gear Modul 0.8 23T (2nd) Clutch Gear Modul 0.8
9,90 € *
Art.: 429H
62T (1st) Spur Gear Modul 0.8 62T (1st) Spur Gear Modul 0.8
9,90 € *
Art.: 429B
Kunden haben sich ebenfalls angesehen
TIPP
GR - 1/8 On-Road Clutch Spring "Maximus" - Toni Gruber Edition GR - 1/8 On-Road Clutch Spring "Maximus" - Toni Gruber Edition
16,90 € *
Art.: GR-CS-MX1
TeamC - 1/8 GT - Audi R8 GT "Clear Body" (LW | 1.2mm) - 360mm Wheelbase TeamC - 1/8 GT - Audi R8 GT "Clear Body" (LW | 1.2mm) - 360mm Wheelbase
84,99 € *
Art.: AudiR8-360
T-Works Aufbewahrungsbox 15 Fächer (17.7 x 10.2 x 2.6cm) T-Works Aufbewahrungsbox 15 Fächer (17.7 x 10.2 x 2.6cm)
5,90 € * 6,90 € *
Art.: TT-013-B
Clutch Spring For Adjustable Clutch System (Soft) Clutch Spring For Adjustable Clutch System (Soft)
5,90 € *
Art.: X3GT-61G
O.S. - 1/8 Pleul "R" - Super Strong - 1 Stück O.S. - 1/8 Pleul "R" - Super Strong - 1 Stück
25,94 € * 37,90 € *
Art.: OS-Offer11
Futaba - T10PXR - 2.4 GHz Fernsteuerung inkl. R404SBS Empfänger Futaba - T10PXR - 2.4 GHz Fernsteuerung inkl. R404SBS Empfänger
649,90 € *
Art.: FP05003237
ITD - "GranTurismo" - 1/8 GT nitro onroad Motor .21 - 5 Kanal - Team Edition ITD - "GranTurismo" - 1/8 GT nitro onroad Motor .21 - 5 Kanal - Team...
505,90 € *
Art.: ITD-GrTu-Team
PRC - 150MM DIGITAL CALIPER PRC - 150MM DIGITAL CALIPER
32,90 € *
Art.: PRC-DCSHORT
ILT - 1/8 GT Kit - Efra 2196 + Krümmer (GR01) - by O.S. - Hardcoated ILT - 1/8 GT Kit - Efra 2196 + Krümmer (GR01) - by O.S. - Hardcoated
139,90 € *
Art.: ILS-2196GR01-HC
ITD GranTurismo - Garnitur Komplett (Kolben-Buchse-Pleul-CNC Pin) - (O.S. Pleul) ITD GranTurismo - Garnitur Komplett (Kolben-Buchse-Pleul-CNC Pin) -...
239,90 € *
Art.: ILS2E903020
ITD GranTurismo - Garnitur (Kolben / Buchse) ITD GranTurismo - Garnitur (Kolben / Buchse)
199,90 € *
Art.: ILS2E903003
T-Works - Steel Front 87mm Drive Shaft (1 pcs) - for X5B T-Works - Steel Front 87mm Drive Shaft (1 pcs) - for X5B
12,90 € *
Art.: TO-304F-X5B
Corsatec - Heatsinks with 5mm bullet (2 pcs) Corsatec - Heatsinks with 5mm bullet (2 pcs)
14,90 € *
Art.: CT60027
PICCO - PS21S 1/8 Sport On-Road Motor 5-Kanal (3,5ccm) - (ENS & DMC Legal) PICCO - PS21S 1/8 Sport On-Road Motor 5-Kanal (3,5ccm) - (ENS & DMC Legal)
299,90 € *
Art.: PIC9622
Rear Anti.roll Bar 2.8mm Rear Anti.roll Bar 2.8mm
4,90 € *
Art.: X5-39-2.8
Corsatec - ESC "CTX-8GT" - Race Pro GT 1/8 - 300A Corsatec - ESC "CTX-8GT" - Race Pro GT 1/8 - 300A
276,90 € *
Art.: CT30004
TeamC - 1/8 GT - BMW M4 GT3 "Clear Body" (LW | 1.2mm) - 360mm Wheelbase TeamC - 1/8 GT - BMW M4 GT3 "Clear Body" (LW | 1.2mm) - 360mm Wheelbase
84,99 € *
Art.: BMW-M4-360
T-Works 21 Engine (1/8) Cylinder Remove Tool + Adapter (2) T-Works 21 Engine (1/8) Cylinder Remove Tool + Adapter (2)
25,42 € * 29,90 € *
Art.: TT-133-21
Rear CVD Drive Shaft 106.5mm (2 pcs) Rear CVD Drive Shaft 106.5mm (2 pcs)
28,90 € *
Art.: X5-42A
PRC TOE-LOCK for MUGEN MRX6X PRC TOE-LOCK for MUGEN MRX6X
7,50 € *
Art.: PRC-T008M
T-Works Titan Madenschrauben zur Ausfederwegsbegrenzung - M4x14mm (4 Stück) T-Works Titan Madenschrauben zur Ausfederwegsbegrenzung - M4x14mm (4 Stück)
10,90 € *
Art.: TP-087-E
WTS Transponder Black Pro - RC2/RC3/RC4 Anlagen kompatibel WTS Transponder Black Pro - RC2/RC3/RC4 Anlagen kompatibel
69,90 € *
Art.: WTS-PRO
Mayako - Steel Droop Screws for Mayako MX8 (2 pcs) Mayako - Steel Droop Screws for Mayako MX8 (2 pcs)
6,99 € *
Art.: MYB0148
Mayako - CVD Rebuild Kit for Mayako MX8 (2 pcs) Mayako - CVD Rebuild Kit for Mayako MX8 (2 pcs)
6,99 € *
Art.: MYB0056
Mayako - CVD Front or Rear 100mm Dogbone for Mayako MX8 (2 pcs) Mayako - CVD Front or Rear 100mm Dogbone for Mayako MX8 (2 pcs)
29,99 € *
Art.: MYB0053
DIM3NSION - INS BOX 2025 Filter Set (3 pcs) DIM3NSION - INS BOX 2025 Filter Set (3 pcs)
8,95 € *
Art.: 10045
DIM3NSION - INS BOX 2025 - Efra INS202501- for 1/8 & 1/10 DIM3NSION - INS BOX 2025 - Efra INS202501- for 1/8 & 1/10
33,00 € *
Art.: 10044
O.S. Druckausgleichsdose mit Befestigung O.S. Druckausgleichsdose mit Befestigung
16,90 € *
Art.: OS-71550000
Adjustable GT Clutch Shoe. Black (Soft) Adjustable GT Clutch Shoe. Black (Soft)
25,90 € *
Art.: X3GT-61J
Performance Rammer 9g (Ultra light) für Hong Nor GT (für Optionale Carbon Anbauteile X3GT-78) Performance Rammer 9g (Ultra light) für Hong Nor GT (für Optionale...
16,50 € *
Art.: GR-R-OPT
ITD - Elastic Pliers for Piston sleeve puller (1 pcs) ITD - Elastic Pliers for Piston sleeve puller (1 pcs)
42,90 € *
Art.: ILS-PL01
ITD - Piston Sleeve Puller - Special Tool ITD - Piston Sleeve Puller - Special Tool
149,90 € *
Art.: ILS-PULLER
150cc Low Profile Fuel Tank 150cc Low Profile Fuel Tank
16,50 € *
Art.: X3GT-74
PRC Carburetor Return Spring PRC Carburetor Return Spring
2,50 € *
Art.: PRC-A023
New FRONT Anti-roll Bar 2,8mm New FRONT Anti-roll Bar 2,8mm
4,90 € *
Art.: X3S-53-2.8
New REAR Anti-roll Bar 2,8mm New REAR Anti-roll Bar 2,8mm
4,90 € *
Art.: X3S-54-2.8
New REAR Anti-roll Bar 3,0mm New REAR Anti-roll Bar 3,0mm
4,90 € *
Art.: X3S-54-3.0
Shoe Goo - Spezialdichtmittel und Kleber Original - 3.7 Oz 109,4 ml Tube Shoe Goo - Spezialdichtmittel und Kleber Original - 3.7 Oz 109,4 ml Tube
Inhalt 0.109 Liter (133,03 € * / 1 Liter)
14,50 € *
Art.: ShoeGoo109ml
Optima grey High-Grip 4 shoes clutch with spring set (16 pcs) Optima grey High-Grip 4 shoes clutch with spring set (16 pcs)
19,90 € *
Art.: POCS406
ILT - Krümmer Kit V3 (1/8 GT) ILT - Krümmer Kit V3 (1/8 GT)
39,99 € *
Art.: IT-21GTRV3
Zuletzt angesehen
Diese Website verwendet Cookies, um Ihnen die bestmögliche Funktionalität bieten zu können. Mehr Informationen
Ok, verstanden