Produkte von Mayako

Middle and End Carbon Diff Height Insert for MYB0027B1

Short rear Dogbone for the MX8E.

Front Standard Dogbone for the MX8E.

2pcs per bag - insert used on new steering hubs and knuckles so you will be able to run higher or lower position on camber link just flipping the insert. Insert fits into MYB0039A-02 MYB0039A-03 MYB0039A MYB0039A-01 MYB0040A-02...

Front 54,50mm (Stock) Shock Shafts for Mayako MX8 (-21). New Revision (A) - Updated Threads

Lower King pins for KPI-0.5 C-Hubs

Right KPI-0.5 Steering Knuckle for Mayako MX8 (22-24) This knuckle allows you to use front cvd or universal driveshaft

Right C-Hub KPI-1 Caster 2 with camber link insert included for Mayako MX8 (22-24) Fits on: MYB0043B-01 MYB0043B To use with old knuckles remove top red shim height.

Right C-Hub KPI-1 Caster 1 with camber link insert included for Mayako MX8 (22-24) Remember to order lower King Pin for KPI-1, part: MYB0047A Fits on: MYB0043B-01 MYB0043B To use with old knuckles remove top red shim height.

Right C-Hub KPI-0.5 Caster 2 with camber link insert included for Mayako MX8 (22-24) Remember to order lower King Pin for KPI-0,5, part: MYB0047-01 Fits on: MYB0043B-01 MYB0043B To use with old knuckles remove top red shim height.

Right C-Hub KPI-0.5 Caster 1 with camber link insert included for Mayako MX8 (22-24) Remember to order lower King Pin for KPI-0.5, Part: MYB0047-01 Fits on: MYB0043B-01 MYB0043B To use with old knuckles remove top red shim height

B-Block for Mayako MX8 for Screw Type Inner Hinge Pin. These blocks are stock on -23 and newer models. They work on older models also, but you need to replace both blocks and use the screw type hinge pins.

Carbon fiber spacers for the A and D block height as well as front and rear shock tower height

Arm Hingepin for the new captured Hingepin Design

CVD Front or Rear 98mm Short Dogbone for Mayako MX8 to use with shorter Soft Arms MYA0034 on an MX8

Front 59,50mm (Long) Shock Shafts for Mayako MX8 (-21). New Revision(A) - Updated Threads

Steel Lower King Pins for KPI-1 C-Hubs

Steel King Pins 2pcs 0 and 2pcs +2 for Mayako MX8 (22-24) Used for top and bottom at kpi0 hubs, top on old kpi1. They are used for upper position for the latest c-hubs and knuckles. MYB0039A-02 MYB0039A-03 MYB0039A MYB0039A-01...

Softer Front Arms for MX8.

Servo posts for the MX8E.

Servo brace for the MX8E.

Right KPI-1 Steering Knuckle for Mayako MX8 (22-24) This knuckle allows you to use front cvd or universal driveshaft

The spacer is used inside the knuckle to have the fitment necessary for the CVD driveshafts. Used on new steering knuckles MYB0042B, MYB0042B-01, MYB0043B and MYB0043B-01

Front brace for the MX8E.

Black B-Block with fixed Height Positions for MX8.

Top Steering Plate for MX8E and for 2+2(2F2R) Chassi Plate(F9L)

Customise your MX8 with coloured pills for the suspension mounts, these pills got the through holes for the new generation hinge pins MYB0032-01

Customise your MX8 with coloured pills for the suspension mounts, these pills got the through holes for the new generation hinge pins MYB0032-01

Customise your MX8 with coloured pills for the suspension mounts, these pills got the through holes for the new generation hinge pins MYB0032-01

A-Block with Insert Backward for captured Hingepin Design You need MYB0026B1CF - Carbon A Block Spacer Middle and End, for MYB0027B1 in addition

Arm pills with through holes for newer generation hinge pins MYB0032-01.

Hex pins for the MX8 buggy.

Black Front Aluminium Shock Tower for MX8.

Aluminium Steering Knucke Plate 1 (Long) for MX8.

Black A-Block with fixed Height Positions for MX8

27.5g saved over MYB0004

Prototype battery brace for the MX8E

Carbon Battery Brace for the MX8E

Front turnbuckle for upper arm configuration.

Customise your MX8 buggy with the coloured shock mounting hardware

Customise your MX8 buggy with the coloured shock mounting hardware

Customise your MX8 buggy with the coloured shock mounting hardware

Use this clip in case you want to adjust and limit your uptravel setup

Turnbuckle screw used for the adjustable anti-roll bar link

Plastic Anti-Roll Bar Links for front and rear anti-roll bars for Mayako MX8

Customise your MX8 buggy with these coloured inserts for upper front and rear arms

Customise your MX8 buggy with these coloured inserts for upper front and rear arms.

Customise your MX8 buggy with these coloured inserts for upper front and rear arms

Upper arm inserts for front and rear.

MX8 vented shock caps wit O-rings for emulsion style shock absorbers.

Clip: 1x 1mm & 2x 2mm Shim: 1x 1mm & 2x 2mm Clips and shims to adjust position of the upper front and upper rear arms.

Shock collars and O-rings for the MX8 shocks.

Spring cups for the MX8 buggy.

Short shock ends for the MX8 buggy, the part number for the longer version MYB0137.

Stock shock mounting hardware for the MX8 buggy.

Spare shock boots, good to have in case you rip them a part when rebuilding the shocks or changing springs. A torn shock boot can allow dirt to get inside and it will wear out the shock shaft and o-rings faster.

Rebuild kit for the MX8 shock absorbers. Recomended be replaced once in a while to keep your shocks operating smoothly.

Plastic Upper Link Straight ball ends for Mayako MX8

Plastic Upper Link Curved ball ends for Mayako MX8

Middle Height Spacer Set for gearboxes and towers for Mayako MX8

Rear chassi brace mount for the MX8E.

Mayako - Motor-Diff Mount for Mayako MX8E

Mayako - Motor Plate for Mayako MX8E

Carbon Electronics Plate for the MX8E

Bushings for the MX8E Electronics Plate.

Motor diff mount for the MX8E

Centre Diff Mount Front Top for the MX8E.

arbon Center Diff Mount Cover for the MX8E.

Rear Carbon Battery Holder for MX8E.

Inner Carbon Battery Holder for MX8E.

Front Carbon Battery Holder for MX8E.

Bodymountparts for the MX8

Full Battery Mounting Kit for MX8E to upgrade from Prototype or as Spare Kit.

Airfilterholder Wire for the MX8

Mayako - 3mm Main Chassis for Mayako MX8E

3mm Black Main Chassi for Mayako MX8

Top parts of the split engine mounts for easier maintenance, also needed when running the longer engine mount MYB0077-01

Complete kit with everything included for throttle and brake linkage.

Mayako - Throttle Linkage Collars (2pcs Large) - (2pcs Small) for Mayako MX8

Plastic parts for servo saver option. Solid bellcrank option MYB0023

Steel gearbox screws to hold the MX8 suspension mounts in place

Updated brake disks for longer life and smoother brake feel, for Mayako MX8. These disks work on all MX8 models

Remove the servo saver and make your steering more responsive with the solid steering bellcrank for the MX8

Servo link set with all parts needed to replace the complete link Servo saver replacement parts with spring, aluminum collar and aluminum tube.

Steel shock stand off for the MX8 buggy, save some weight and get them in aluminium MYB0138-ALU

Droop screws to limit downtravel of the suspension.

Steel turnbuckles for links configuration of the MX8 buggy

Servo link set with all parts needed to replace the complete link.

Plastic Steering Link Straight for Mayako MX8

Plastic Steering Link Curved for Mayako MX8

Plastic Front Brace for Mayako MX8

Offset Steering Link Bushings to insert in MYB0044-01 Carbon steering knuckle plate 1 (Long) or MYB0044-02 Carbon steering knuckle plate 2 (Short) to get long or short steering link for Mayako MX8

Lower Arm Shock Position Insert 3 (Outside) (Yellow) for Mayako MX8

Lower Arm Shock Position Insert 3 (Outside) (Orange) for Mayako MX8

Lower Arm Shock Position Insert 3 (Outside) (Green) for Mayako MX8

Lower Arm Shock Position Insert 2 (Middle) (Yellow) for Mayako MX8

Lower Arm Shock Position Insert 2 (Middle) (Orange) for Mayako MX8

Lower Arm Shock Position Insert 2 (Middle) (Green) for Mayako MX8

Lower Arm Shock Position Insert 1 (Inside) (Yellow) for Mayako MX8

Lower Arm Shock Position Insert 1 (Inside) (Orange) for Mayako MX8

Lower Arm Shock Position Insert 1 (Inside) (Green) for Mayako MX8

Lightweight knurled wheel nuts for Mayako MX8 (-22). 2.5g saved over MYB0060

Lower Arm Shock Position Insert 3 (Outside) (Black) for Mayako MX8

Lower Arm Shock Position Insert 2 (Middle) (Black) for Mayako MX8

Lower Arm Shock Position Insert 1 (Inside) (Black) for Mayako MX8

Knurled wheel nuts for Mayako MX8

High or Low Height Spacer Set for Gearboxes and Towers for Mayako MX8

Long shock ends for Mayako MX8

Front Shock Spring Grey 65mm 9.0 Linear for Mayako MX8

Front Shock Spring Brown 65mm 8.75 Linear for Mayako MX8

Front Shock Spring Black 65mm 8.5 Linear for Mayako MX8

Front and rear bearing crush washers to use between the bearings in the front steering knuckels and the diffrent rear hubs for Mayako MX8

Emulsion Gaskets to insert in MYB0131 Vented shock caps for Mayako MX8

Differential Outdrives for front, centre and rear for Mayako MX8

Emulsion Gaskets to insert in MYB0131 Vented shock caps for Mayako MX8

Front 2mm plastic gearbox spacer set to use between MYB0001 3mm Main (STD) chassi and MYB0006 Front gearbox for Mayako MX8

Front 1mm plastic gearbox spacer set to use between MYB0001 3mm Main (STD) chassi and MYB0006 Front gearbox for Mayako MX8

Differential internal gear set for Front, centre and rear for Mayako MX8

Carbon Fibre steering knuckle plate 1 (Long) for Mayako MX8

Carbon Fibre steering knuckle plate 2 (Short) for Mayako MX8

Carbon fibre upper steering plate for upper links for Mayako MX8 3.7g saved over MYB0017

Carbon Fibre Front Shock Tower for upper links for Mayako MX8

MXP High Performance Bearings to use with MYB0112-13 13t Pinion gear or MYB0112-14 14t Pinion gear for Mayako MX8

Aluminium upper steering plate to use with the upper arms for Mayako MX8

If you use the MYB0113-43 Ring gear you need to use MYB0112-13 13t Pinion gear for Mayako MX8

New stronger version of the aluminium steering posts for Mayako MX8

Arm Pill Inserts (Black) for A-B-C-D blocks with MYB0032 Inner Hinge Pins for Mayako MX8

Arm Pill Inserts (Yellow) for A-B-C-D blocks with MYB0032 Inner Hinge Pins for Mayako MX8

Arm Pill Inserts (Orange) for A-B-C-D blocks with MYB0032 Inner Hinge Pins for Mayako MX8

Arm Pill Inserts (Green) for A-B-C-D blocks with MYB0032 Inner Hinge Pins for Mayako MX8

Anti-Roll Bar collets, inserted in MYB0170 Flanged ball bearings to keep the anti-roll bars in place for Mayako MX8

Aluminium Short Shock Stand-Off for Rear 4pcs for Mayako MX8 8g saved over MYB0138

The lower ball on the anti-roll bar links and the ball in the shock ends for Mayako MX8

The upper ball on the anti-roll bar links for Mayako MX8

Bearings to use for the diffs and front and rear driveshafts for Mayako MX8

Bearings to use with MYB0112-13 13t Pinion gear or MYB0112-14 14t Pinion gear for Mayako MX8

To use these bearings, you need MYB0050-01 Rear Alu Hub or MYB0050 Rear Plastic Hub to use the MYB0052-01 94mm rear driveshafts with them for Mayako MX8

To use the 1mm spacer, you need MYB0012 Plastic front brace or MYB0013 Plastic rear brace for Mayako MX8

Ackermann Plate Bushing for MYB0018 Ackermann Plate for Mayako MX8

These bearings is used for the MYB0023 Solid right steering bellcrank and MYB0021 Servo saver with the MYB0022 Steering plastic parts for Mayako MX8

Arm Pill Inserts (Gray) for A-B-C-D blocks with MYB0032 Inner Hinge Pins for Mayako MX8

Alunminium threaded balls for servo steering link, inserted in MYB0066 Servo link set for Mayako MX8

The Combo includes: - Corsatec - 1900kv CT-R Race Pro Motor - Offroad OR 2100kv / #CT40001 OR #CT40002 - Corsatec - ESC "CTX-8RS" - Race Pro 1/8 - 250A (Black Edition) #CT30001BK - マヤコ Mayako MX8E-26 1:8 EP 4WD Elektro Buggy # MYE0377-26...

STOCK SETUP SHEET MAYAKO MX8E-24 Setup Sheet Version 1.1 EMPTY SETUP SHEET MAYAKO MX8E-24 Setup Sheet Version 1.1 The centre section of the MX8E features the option to run either shorty or standard brick pack LiPo’s along with adjustable...