1/8 Lexan Buggy Wing - 1,5mm (2 pcs)

XTREME
Vorschau: 1/8 Lexan Buggy Wing - 1,5mm (2 pcs) Vorschau: 1/8 Lexan Buggy Wing - 1,5mm (2 pcs)
1/8 Lexan Buggy Wing - 1,5mm (2 pcs)
1/8 Lexan Buggy Wing - 1,5mm (2 pcs)
   
25,90 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-2 Werktage

  • Artikel-Nr.: MTRW1-8BL
Beschreibung Bewertungen 0
Beschreibung
mehr
Menü schließen
Produktinformationen "1/8 Lexan Buggy Wing - 1,5mm (2 pcs)"
"1/8 Lexan Buggy Wing - 1,5mm (2 pcs)"

Verantwortlicher nach GPSR / person responsible GPSR

XTREME S.R.L.
Via Fuiume 9, 20020 Busto Garolfo, Milano
IT
https://xtremeaerodynamics.it/
cristian@matrixtires.it

Hersteller / Manufacturer

XTREME S.R.L.
Via Fuiume 9, 20020 Busto Garolfo, Milano
IT
https://xtremeaerodynamics.it/
cristian@matrixtires.it

 

ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet

wegen verschluckbarer Kleinteile, Erstickungsgefahr.
CAUTION: Not suitable for children under 36 months

due to small parts that can be swallowed, choking hazard.

 

ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet.

Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
CAUTION: Not suitable for children under 14 years of age.

Use under the direct supervision of adults.


Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements

  • H 315: Verosol vermeiden.

(Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)

  • P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)

  • P 280: Schutzhandschuhe / Schutzkleidung / Augenschrursacht Hautreizungen (Causes skin irritation)

  • H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)

  • H 335: Kann die Atemwege reizen (May irritate the respiratory tract)

    Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements

  • P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)

  • P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aeutz / Gesichtsschutz tragen. (Wear protective gloves /

    protective clothing / eye protection / face protection.)

  • P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen.

    Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes:

    Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)

  • P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)

  • P 405: Unter Verschluss aufbewahren. (Store under lock and key.)

  • P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)

Sicherheitshinweise / EUH | Safety instructions / EUH

  • EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen.

    Darf nicht in die Hände von Kindern gelangen. 

Bewertungen 0
Bewertungen lesen, schreiben und diskutieren... mehr
Menü schließen
Kundenbewertungen für "1/8 Lexan Buggy Wing - 1,5mm (2 pcs)"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Kunden kauften auch Kunden haben sich ebenfalls angesehen
Kunden kauften auch
1/8 Lexan Buggy Wing - 1,0mm (2 pcs) 1/8 Lexan Buggy Wing - 1,0mm (2 pcs)
22,90 € *
Art.: MTRW1-8BUL
1/8 "MISTRAL" -uncut- 1,00mm (light) 1/8 "MISTRAL" -uncut- 1,00mm (light)
25,90 € *
Art.: MTB0426-10
1/8 "ARIA" -precut- MUGEN MBX8R 1,00mm (light) nitro 1/8 "ARIA" -precut- MUGEN MBX8R 1,00mm (light) nitro
28,90 € *
Art.: MTB0425-10CM
1/8 "ARIA" -uncut- 0,75mm (ultra light) 1/8 "ARIA" -uncut- 0,75mm (ultra light)
26,90 € *
Art.: MTB0425-07
1/8 "ARIA" -uncut- 1,00mm (light) 1/8 "ARIA" -uncut- 1,00mm (light)
25,90 € *
Art.: MTB0425-10
6MIK Radikal 1/8 Offroad Karosserie für MBX8/R & HB 6MIK Radikal 1/8 Offroad Karosserie für MBX8/R & HB
29,30 € *
Art.: PB122
1/8 Xtreme Versteifungen + Abrisskante + Schrauben set 1/8 Xtreme Versteifungen + Abrisskante + Schrauben set
17,50 € *
Art.: MTR003
Mayako - Official Standard T-Shirt (Auswahl / Select) Mayako - Official Standard T-Shirt (Auswahl / Select)
21,90 € *
Art.: MYM0002-M
1/8 "MISTRAL" -uncut- 0,75mm (ultra light) 1/8 "MISTRAL" -uncut- 0,75mm (ultra light)
26,90 € *
Art.: MTB0426-07
Screw Kit for Wing (10 pcs) Screw Kit for Wing (10 pcs)
8,90 € *
Art.: MTR999
1/8 "ARIA" -precut- HB D8 World 1,00mm (light) nitro 1/8 "ARIA" -precut- HB D8 World 1,00mm (light) nitro
28,90 € *
Art.: MTB0425-10CH
1/8 "ARIA" -precut- MUGEN MBX8R 0,75mm (ultra light) electric 1/8 "ARIA" -precut- MUGEN MBX8R 0,75mm (ultra light) electric
29,90 € *
Art.: MTB0425-07ECM
Shoe Goo - Spezialdichtmittel und Kleber Original - 3.7 Oz 109,4 ml Tube Shoe Goo - Spezialdichtmittel und Kleber Original - 3.7 Oz 109,4 ml Tube
Inhalt 0.109 Liter (133,03 € * / 1 Liter)
14,50 € *
Art.: ShoeGoo109ml
PG POLY LIQUID Exaust cleaner - 2400g PG POLY LIQUID Exaust cleaner - 2400g
49,90 € *
Art.: PG16201
Nr 710L Lexan Farbe Weiß 400ml Nr 710L Lexan Farbe Weiß 400ml
Inhalt 0.4 Liter (34,75 € * / 1 Liter)
13,90 € *
Art.: RCC710-L
Reifen - 0/18° (Super Soft) (2) Scratch Reifen - 0/18° (Super Soft) (2) Scratch
12,80 € *
Art.: T170018
C.A. Special Reifen Sekundenkleber - Dünn (20 gr) C.A. Special Reifen Sekundenkleber - Dünn (20 gr)
5,99 € *
Art.: PCPF
OS Glühkerze P3 Turbo ultra hot (Offroad) OS Glühkerze P3 Turbo ultra hot (Offroad)
9,50 € *
Art.: OS-71641300
ITD - Easy Adjustable - Top Needle ONLY for O.S. Carburetor ITD - Easy Adjustable - Top Needle ONLY for O.S. Carburetor
19,90 € *
Art.: ILS-21025
Mayako - Aluminium Floating Steering Servo Plate for Mayako MX8E Mayako - Aluminium Floating Steering Servo Plate for Mayako MX8E
19,99 € *
Art.: MYE0008A-02
Mayako - Carbon Fibre Floating Steering Servo Bracket + M3x18mm Screws & Height Shims for Mayako MX8 Mayako - Carbon Fibre Floating Steering Servo Bracket + M3x18mm Screws &...
9,99 € *
Art.: MYE0008A-01
IS - Setup Tools Bag for Invisible Speed Setup Station IS - Setup Tools Bag for Invisible Speed Setup Station
69,90 € *
Art.: IS-ToolsBag
Rear Wing (Black) Rear Wing (Black)
14,90 € *
Art.: 452-B
Carbon Rear Arm Plate (2 pcs) Carbon Rear Arm Plate (2 pcs)
23,90 € *
Art.: X5-14
Carbon Front Arm Plate (2 pcs) Carbon Front Arm Plate (2 pcs)
17,90 € *
Art.: X5-13
T-Works 5mm Goldstecker -13mm (Set) (Rot / Schwarz) T-Works 5mm Goldstecker -13mm (Set) (Rot / Schwarz)
9,90 € *
Art.: EA-040-5L-RB
3.6x8x2mm Aluminium Washer (2 pcs) 3.6x8x2mm Aluminium Washer (2 pcs)
3,90 € *
Art.: X5-40-2.0
3.6x8x2.5mm Aluminium Washer (2 pcs) 3.6x8x2.5mm Aluminium Washer (2 pcs)
3,90 € *
Art.: X5-40-2.5
HN - X5B - 1:8 Competition 4WD Nitro Offroad Buggy 2026 HN - X5B - 1:8 Competition 4WD Nitro Offroad Buggy 2026
649,90 € *
Art.: 64026
PRC Bearing Cleaner without Liquid PRC Bearing Cleaner without Liquid
7,90 € *
Art.: PRC-C007WO
Mayako - Carbon Fiber Brace for Plastic Rear Brace with 5pcs M2x8 Screws for Mayako MX8 Mayako - Carbon Fiber Brace for Plastic Rear Brace with 5pcs M2x8 Screws...
9,99 € *
Art.: MYB0013CF
Mayako - Carbon Fiber 1mm Diff Height Chassis Brace for Mayako MX8 Mayako - Carbon Fiber 1mm Diff Height Chassis Brace for Mayako MX8
15,99 € *
Art.: MYB0010-01CF
T-Works Carbon Fuel Tank Guard V2 - für Mugen MBX8R T-Works Carbon Fuel Tank Guard V2 - für Mugen MBX8R
9,90 € *
Art.: TO-255-MBX8-V2
Mayako - Mayako Official Pitmat (100x60cm) Mayako - Mayako Official Pitmat (100x60cm)
24,99 € *
Art.: MYM0013-01
T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - A & B Mount Type A (4 Stück) T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - A & B Mount...
9,90 € *
Art.: TO-347-M-A0
T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - A & B Mount Type B (4 Stück) T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - A & B Mount...
9,90 € *
Art.: TO-347-M-A1
T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - A & B Mount Type C (4 Stück) T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - A & B Mount...
9,90 € *
Art.: TO-347-M-A2
T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - C & D Mount Type A (4 Stück) T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - C & D Mount...
9,90 € *
Art.: TO-347-M-B0
T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - C & D Mount Type B (4 Stück) T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - C & D Mount...
9,90 € *
Art.: TO-347-M-B1
T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - C & D Mount Type C (4 Stück) T-Works CNC Machined Delrin Arm Mount Insert - für MBX8R - C & D Mount...
9,90 € *
Art.: TO-347-M-B2
Kunden haben sich ebenfalls angesehen
1/8 Lexan Buggy Wing 2.0 - 1,5mm (2 pcs) 1/8 Lexan Buggy Wing 2.0 - 1,5mm (2 pcs)
28,90 € *
Art.: MTRW1-8BL2.0
1/8 Lexan Buggy Wing - 1,0mm (2 pcs) 1/8 Lexan Buggy Wing - 1,0mm (2 pcs)
22,90 € *
Art.: MTRW1-8BUL
Xtreme - 1/10 Lexan Buggy Wing - 1,00mm - (1x 6.5in & 1x 7.0in | Precut) Xtreme - 1/10 Lexan Buggy Wing - 1,00mm - (1x 6.5in & 1x 7.0in | Precut)
27,90 € *
Art.: MTRW1-10BL
6MIK - "Rafale" 1/8 Offroad Karosserie 6MIK - "Rafale" 1/8 Offroad Karosserie
24,50 € *
Art.: PB127
TIPP
HN - iX5B 1/8 Buggy 4WD Pro Kit Electric 2026 HN - iX5B 1/8 Buggy 4WD Pro Kit Electric 2026
629,90 € *
Art.: iX5B
T-Works - 7075-T6 Alum. Rear Hubs (Set) - for X5B T-Works - 7075-T6 Alum. Rear Hubs (Set) - for X5B
74,90 € *
Art.: TO-279-X5B
HN - X5B - 1:8 Competition 4WD Nitro Offroad Buggy 2026 HN - X5B - 1:8 Competition 4WD Nitro Offroad Buggy 2026
649,90 € *
Art.: 64026
6MIK - "Viper" 1/8 Offroad Karosserie 6MIK - "Viper" 1/8 Offroad Karosserie
24,50 € *
Art.: PB123
1/8 "ARIA" -precut- SWORKS S35-4 EVO 0,75mm (ultra light) nitro 1/8 "ARIA" -precut- SWORKS S35-4 EVO 0,75mm (ultra light) nitro
29,90 € *
Art.: MTB0425-07CW
16mm Shock Body Damper Cylinder Rod Guide Set 16mm Shock Body Damper Cylinder Rod Guide Set
5,90 € *
Art.: 424
IS - Lightweight 950g Carbon Setup Board (500x390x10mm) + Transport Air-Protect Bag IS - Lightweight 950g Carbon Setup Board (500x390x10mm) + Transport...
199,99 € *
Art.: INVT008
HN - Leak-proof gasket (4 pcs) for 16mm Aluminium Aeration Shock Cap HN - Leak-proof gasket (4 pcs) for 16mm Aluminium Aeration Shock Cap
2,90 € *
Art.: X5-33B
iX5B Clear Body EP iX5B Clear Body EP
29,90 € *
Art.: X5-29E
TIPP
Hong Nor iX5B 1/8 Buggy Electric 2026 + Corsatec 1900 or 2100kv + Corsatec 250A Black Edition Hong Nor iX5B 1/8 Buggy Electric 2026 + Corsatec 1900 or 2100kv +...
824,90 € * 919,89 € *
Art.: HongNorCombo
Rear Hub. Alum (2 pcs) Rear Hub. Alum (2 pcs)
54,90 € *
Art.: X5S-01
Carbon Rear Arm Plate (2 pcs) Carbon Rear Arm Plate (2 pcs)
23,90 € *
Art.: X5-14
Carbon Front Arm Plate (2 pcs) Carbon Front Arm Plate (2 pcs)
17,90 € *
Art.: X5-13
Front CVD Drive Shaft 92,5mm (2 pcs) Front CVD Drive Shaft 92,5mm (2 pcs)
43,90 € *
Art.: X5-15
MYLAPS - RC4 Transponder MYLAPS - RC4 Transponder
109,99 € *
Art.: 10R120
T-Works Compact Hard Case Battery Bag (27 x 21 x 9cm) T-Works Compact Hard Case Battery Bag (27 x 21 x 9cm)
27,90 € *
Art.: TT-075-J
T-Works Aufbewahrungsbox 24 Fächer (21.1 x 14.5 x 4cm) T-Works Aufbewahrungsbox 24 Fächer (21.1 x 14.5 x 4cm)
8,90 € *
Art.: TT-013-C
T-Works 1/8 Buggy & Truggy Gewicht (20g) T-Works 1/8 Buggy & Truggy Gewicht (20g)
14,90 € *
Art.: TO-344-A
LRP LIPO 3000 TX-PACK SANWA M12/M12S/MT-4/MT-4S/MT-S/EXZES-Z/SD-10GS / FUTABA T7/T10 - TX-ONLY - 7.4 LRP LIPO 3000 TX-PACK SANWA M12/M12S/MT-4/MT-4S/MT-S/EXZES-Z/SD-10GS /...
40,76 € * 42,90 € *
Art.: 430355
1/8 "ARIA" -precut- SWORKS S35-4 EVO 1,00mm (light) nitro 1/8 "ARIA" -precut- SWORKS S35-4 EVO 1,00mm (light) nitro
28,90 € *
Art.: MTB0425-10CW
6MIK Radikal 1/8 Offroad Karosserie für MBX8/R & HB 6MIK Radikal 1/8 Offroad Karosserie für MBX8/R & HB
29,30 € *
Art.: PB122
NEU
HN - X5B Aluminum Servo Saver - Set HN - X5B Aluminum Servo Saver - Set
47,90 € *
Art.: X5S-18
PG - Moosgummi Reifenschmiermittel 2.0 - 80g (1 pc) PG - Moosgummi Reifenschmiermittel 2.0 - 80g (1 pc)
14,90 € *
Art.: PG19102
1/8 Hyper Diablo -precut- Mugen MRX7 - 0,75mm (ultra light) 1/8 Hyper Diablo -precut- Mugen MRX7 - 0,75mm (ultra light)
32,50 € *
Art.: MTB0423-07CM-MRX7
GR - RX BATTERY VOLTAGE CHECKER GR - RX BATTERY VOLTAGE CHECKER
12,90 € *
Art.: GR-A030
PRC / Ielasi - Digital Clutch GAP Gauge PRC / Ielasi - Digital Clutch GAP Gauge
19,90 € *
Art.: PRC-ClutchGauge
X5 Diff Set for center Diff set (46T) X5 Diff Set for center Diff set (46T)
43,90 € *
Art.: X5-45
X5 Diff Set for front and rear (43T) X5 Diff Set for front and rear (43T)
43,90 € *
Art.: X5-44
CNC 7075-3mm Lightweight Chassis Plate - iX5B CNC 7075-3mm Lightweight Chassis Plate - iX5B
102,90 € *
Art.: X5-51
Receiver / ESC / Servo - Holder (Set) Receiver / ESC / Servo - Holder (Set)
12,90 € *
Art.: X5-49
Battery Holder (2 pcs) Battery Holder (2 pcs)
6,90 € *
Art.: X5-48
3,46 O-Ring (8 pcs) 3,46 O-Ring (8 pcs)
2,90 € *
Art.: 465
16mm Front Shock Body (2 pcs) 16mm Front Shock Body (2 pcs)
18,90 € *
Art.: 387A-G
TIPP
Hong Nor - X3GT '26 - 1/8 GT Nitro Pro Kit 4wd Hong Nor - X3GT '26 - 1/8 GT Nitro Pro Kit 4wd
829,90 € *
Art.: 64027
Corsatec - Höhenlehre 20-30 mm Aluminium Corsatec - Höhenlehre 20-30 mm Aluminium
16,90 € *
Art.: CT60004
Corsatec - Magnetische Schraubenplatte Corsatec - Magnetische Schraubenplatte
17,90 € *
Art.: CT60007
Zuletzt angesehen